XY-2 Spindle Type Geological Drilling Machine, Water Well Drilling Rig,Diamond Coring Rig

Product Feature:

xy-2 is a core drilling rig for middle and shallow hole, especially for the soil test. It applies not only to alloy and diamond core drilling with different calibres but also can be used for geological prospecting works, drilling of fluid mineral in superficial layer and shot holes and ventilation holes drilling, drilling on hydrology, water wells and big calibres. It has been widely used on areas such as road and railway construction, water resources and hydropower and architecture.

Product Parameter:

Applicable scope

Suitable for industrial, civil, and geothermal drilling, it has the advantages of large drilling diameter, deep drilling depth, fast footage, flexible movement, and wide application area.

What are the disadvantages of oil cooling of hydraulic water well drilling rig?

1. Oil cooling will cause low oil pressure. If the oil pressure is too low, the mating parts will be partially dried or dried.

2. The cooling of oil will also lead to the appearance of combustion oil.

3. Oil cooling will increase the noise of the proposed machine.

4. Oil cooling is not easy to form oil film, and then the lubrication function of oil will be greatly reduced when the water well drilling machine is used.

Precautions for using drilling rigs

This drilling technique aims to form holes by puncturing scrap steel with air pressure. The generated debris will be released from the surface and fall on the surrounding surface of the machine for use. The use method is that when the material is driven from the ground, the material is usually damaged.

When it is necessary to carry out hole detection on hard materials such as rocks, the drilling method of impact rotating air holes can use a method with a length of more than 25 meters for water well drilling problems. In this method, only some products used were analyzed. Therefore, rocks can explore the following soils.

​