50 Ohms RF Radio Frequency Connector Low VSWR For Mobile Communication
n type coax connector
din coaxial connector
Standards Implemented
YD/T 1967-2018 50Ω radio frequency coaxial connectors for mobile communication
GB/T 11313.1-2013 Radio-frequency connectors. Part 1: Generic specification. General requirements and measuring methods
GB/T 11313.4-2007 Radio-frequency connectors. Part 4: R.F. coaxial connectors with inner diameter of outer conductor 16mm (0.63 in) with screw coupling - Characteristic impedance 50 ohms (Type 7-16)
GB/T 11313.16-2015 Radio-frequency connectors. Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7mm (0.276in) with screw coupling - Characteristic impedance 50Ω (75Ω) (Type N)
Product Features
Low VSWR, low insertion loss and low intermodulation;
Ease of installation, good sealing performance and high protection grade;
Mainly used for electrical and mechanical connection of radio frequency and leaky coaxial cables.
Technical Parameters
Product Type | Type N | Type DIN | |
Structural Parameters | |||
Central contact | Central pin | Silver-plated brass | Silver-plated brass |
Central jack | Silver plated tin bronze | Silver plated tin bronze | |
Insulator | PTFE | PTFE | |
Shell | Tri-alloy plated brass | Tri-alloy plated brass | |
Sealing part | Silicone rubber | Silicone rubber | |
Electrical Properties | |||
Characteristic Impedance | 50Ω | 50Ω | |
Insertion loss | 900MHz | ≤0.10dB | ≤0.10dB |
2000MHz | |||
VSWR | 75~500MHz | ≤1.08 | ≤1.08 |
700~1000MHz | ≤1.08 | ≤1.08 | |
1700~2500MHz | ≤1.10 | ≤1.10 | |
2500~3000MHz | ≤1.15 | ≤1.15 | |
3300~3600MHz | ≤1.20 | ≤1.20 | |
Contact resistance | Inner Conductor | ≤0.80mΩ | ≤0.40mΩ |
Outer Conductor | ≤0.25mΩ | ≤0.20mΩ | |
Insulation resistance | ≥5000mΩ | ≥10000mΩ | |
Withstanding voltage (Minimum) | 2.5KV | 4.0KV | |
Working voltage (Maximum) | 1.4KV | 2.7KV | |
Third-order intermodulation (2×20W) | 900MHz | ≤-155dBc | ≤-155dBc |
1800MHz | |||
Mechanical Properties | |||
Test gauge retention force | ≥0.56N | ≥6N | |
Coupling torque | Normal torque | 0.7~1.1Nm | 20~28Nm |
Withstanding torque | ≥1.7Nm | ≥30Nm | |
Mechanical endurance | 500 times | 500 times | |
Ambient temperature | -65~+160℃ | -65~+160℃ |