Description of Water Treatment
WECHANG high flow filter cartridge are coreless, single open-ended filters that offer high filtration efficiency. These filters have a large diameter and laid over pleated cartridge with an inside-to-outside flow pattern that prevents debris from escaping the filter. The high flow rate at 1900 lpm or 500 gpm for a 60-inch length element allows for fewer cartridge change-outs.
Application of Water Treatment
Features of Water Treatment
Operating Characteristic of Water Treatment
Outer Diameter | 6”/158mm |
Length | 20”/508mm 40”/1016mm 60”/1524mm |
Pore Size | 0.7, 1.5, 10, 20, 30, 70, 100μm |
Max. Operation Temperature | 80℃ |
Max. Operation Pressure | Forward direction: 0.58 MPa(25±2℃) 0.24MPa(80±2℃) *It not recommend for reverse use |
Filtration Areas | 20”≥6m²; 40”≥12m²; 60”≥18m². |
Integrity Testing | Bubble point≥60KPa 50KPa pressure, diffusion flow<10 ml/min Anhydrous ethanol was used as the wetting solution at 25°C, and compressed air was used to test the bubble point values against the diffusion flows. |
Sterilization | 30 times (121.4℃,30 min offline high-pressure steam sterilization) |
Bacterial Retention Capacity | Minimum retention rate 107 CFU/cm2 The product was tested against Serratia marcescens (ATCC14756) using ASTM F838 method. |
Extractable Substance | <50 mg/m2 After high-pressure steam sterilization(121.4℃,60 min), 25℃±2℃ immersing in pure water for 24h |
Biosafety | The endotoxin level<0.25 EU/ml, and the extraction solution has no acute toxicity |
Cleanliness | No fibers or other visible foreign objects were detected in the filtered liquid. *Lamp test according to the Chinese Pharmacopoeia 2020 edition <0904> |
Flow Rate of Water Treatment
Material of Structure of Water Treatment
Filter Media | Polypropylene |
Deflector Layer | Polypropylene |
Enclosures/Ports | High Temperature Resistance Polypropylene |
Adapter | Polypropylene |
Seals | Silicone/EPDM |
Naming Regulations of Water Treatment
WF | PL | P | 0022 | 40 | S | |
Trademark | Form | Filtration Materials | Accuracy | length | Adapter | O ring |
WECHANFIB | PLEATED | P PP | 0070 0.7μm | 20 20” | S Silastic | |
Blank EVOH | 0150 1.5μm | 40 40” | E EPDM | |||
1000 10μm | 60 60” | V FKM | ||||
2000 20μm | T PTFE | |||||
3000 30μm | ||||||
7000 70μm | ||||||
0000 100μm |
Wechange Pleated Filter Cartridge Products List | ||||||
Membrane Material | Type No. | Application | Pore Size | Diameter | Length | Adaptor |
μm | mm | inch | ||||
PP/PO | WF-HF-P-0070-20-* | Security Filtration, Clarification Filtration, Liquid Pre Filtration | 0.7 | 158 | 20" | |
PP/PO | WF-HF-P-0070-40-* | 0.7 | 158 | 40" | ||
PP/PO | WF-HF-P-0070-60-* | 0.7 | 158 | 60" | ||
PP/PO | WF-HF-P-0150-20-* | 1.5 | 158 | 20" | ||
PP/PO | WF-HF-P-0150-40-* | 1.5 | 158 | 40" | ||
PP/PO | WF-HF-P-0150-60-* | 1.5 | 158 | 60" | ||
PP/PO | WF-HF-P-1000-20-* | 10 | 158 | 20" | ||
PP/PO | WF-HF-P-1000-40-* | 10 | 158 | 40" | ||
PP/PO | WF-HF-P-1000-60-* | 10 | 158 | 60" | ||
PP/PO | WF-HF-P-2000-20-* | 20 | 158 | 20" | ||
PP/PO | WF-HF-P-2000-40-* | 20 | 158 | 40" | ||
PP/PO | WF-HF-P-2000-60-* | 20 | 158 | 60" | ||
PP/PO | WF-HF-P-3000-20-* | 30 | 158 | 20" | ||
PP/PO | WF-HF-P-3000-40-* | 30 | 158 | 40" | ||
PP/PO | WF-HF-P-3000-60-* | 30 | 158 | 60" | ||
PP/PO | WF-HF-P-7000-20-* | 70 | 158 | 20" | ||
PP/PO | WF-HF-P-7000-40-* | 70 | 158 | 40" | ||
PP/PO | WF-HF-P-7000-60-* | 70 | 158 | 60" | ||
PP/PO | WF-HF-P-0000-20-* | 100 | 158 | 20" | ||
PP/PO | WF-HF-P-0000-40-* | 100 | 158 | 40" | ||
PP/PO | WF-HF-P-0000-60-* | 100 | 158 | 60" |
The high-flow water filter element is a kind of filter element used to filter water, a single filter element has a large flow rate, low installation cost, low operating cost, and a small number of filter element replacements. No adhesives, adhesives or silicone adhesives are used in the manufacturing process, which minimizes losses due to discarding, and has a U-shaped sealing groove to ensure high filtration
Efficiency.
1.Security filtration
2.Clarification filtration
* The internal structure of the filter element has been optimized to allow a large volume of water flow, reducing pressure loss during the water treatment process, and improving the overall efficiency of the water treatment system.
* Generally made of materials that are resistant to corrosion and high pressure, such as stainless steel or engineering plastics, to ensure that the filter element operates stably under various water treatment conditions.
* The filter element is typically designed as a quick-release component, facilitating regular replacement of the filter element and maintaining the continuous and efficient operation of the water treatment system.
* The fluid quality after filtration is higher, suitable for applications that require high fluid quality, such as the food, beverage, and pharmaceutical industries.
* Strict quality control system, complete production process flow;
* Short delivery period;
* Flexible payment method: T/T, L/C, West Union, Paypal;
* Free technical support;
Dimensions(nominal):
OD | 158mm |
Length | 40"(1016mm) |
Material of Construction:
Filter Media | Deflector layer | port | Enclosures/Ports | Seals Material |
Polypropylene | Polypropylene | Polypropylene | Polypropylene | Silastic/EPDM |
Beer Clarification Filter Cartridge Performance:
Biosafety | All ingredients comply with USP (United States Pharmacopoeia) Level 6 plastic testing |
Food Accessibility | All ingredients comply with GB 4806.7-2016 |
Executive Standard | Q/WCF 001-2021 |
Cleanliness | The product does not have any particles, fibers, or other foreign objects falling off |
The Maximum Work Temperature | 80℃(△P 0.1Mpa) |
Effective filtration area | ≥12 m2/40” |
PH | 1-14 |
Suggesting Renewal Pressure Difference | 0.2MPa |