Description of Water Treatment
WECHANGE PP membrane filters are high efficiency depth type filters constructed entirely of chemically resistant polypropylene. They are economical, premium quality products that deliver consistently high filtration efficiency, superior flow rates, substantial dirt holding capacity, and exceptionally long service life. All-polypropylene construction makes it a cost-effective choice for clarification and prefiltration applications.
WECHANGE PP membrane filters are ideal for clarification, polishing, bioburden reduction and prefiltration applications. It is compatible with a wide range of chemicals and cleaning agents.
Application of Water Treatment
Features of Water Treatment
Operating Characteristic of Water Treatment
Outer Diameter | 2.7”/69mm |
Length | 10”/254mm 20”/508mm 30”/762mm 40”/1016mm 60”/1524mm |
Pore Size | 1, 3, 5, 7, 10μm |
Max. Operation Temperature | 80℃ |
Max. Operation Pressure | Forward direction: 0.58 MPa(25±2℃) 0.24MPa(80±2℃) *It not recommend for reverse use |
Food Contactability | All ingredients are compliant GB 4806.7-2016 |
Filtration Areas | 5”≥0.34m²; 10”≥0.68m²; 20”≥1.36m² 30”≥2.04m²; 40”≥2.72m² |
Integrity Testing | Bubble point≥60KPa 50KPa pressure, diffusion flow<10 ml/min Anhydrous ethanol was used as the wetting solution at 25°C, and compressed air was used to test the bubble point values against the diffusion flows. |
Sterilization | 30 times (121.4℃,30 min offline high-pressure steam sterilization) |
Bacterial Retention Capacity | Minimum retention rate 107 CFU/cm2 The product was tested against Serratia marcescens (ATCC14756) using ASTM F838 method. |
Extractable Substance | <50 mg/m2 After high-pressure steam sterilization(121.4℃,60 min), 25℃±2℃ immersing in pure water for 24h |
Biosafety | The endotoxin level<0.25 EU/ml, and the extraction solution has no acute toxicity |
Cleanliness | No fibers or other visible foreign objects were detected in the filtered liquid. *Lamp test according to the Chinese Pharmacopoeia 2020 edition <0904> |
Filtration direction | Outside-inside |
Flow Rate of Water Treatment
Material of Structure of Water Treatment
Filter Media | Polypropylene |
Deflector Layer | Polypropylene |
Enclosures/Ports | High Temperature Resistance Polypropylene |
Adapter | Polypropylene |
Seals | Silicone/EPDM |
Naming Regulations of Water Treatment
WF | PL | P | 0500 | 10 | A | S |
Trademark | Form | Filtration Materials | Accuracy | length | Adapter | O ring |
WECHANFIB | PLEATED | P PP | 0100 1um | 5 5” | A 222/ FIN | S Silicone |
0300 3um | 10 10” | B 222/Flat | E EPDM | |||
0500 5um | 20 20” | C 226/ FIN | V FKM | |||
0700 7um | 30 30” | D 226/ Flat | T PTFE | |||
1000 10um | 40 40” | E DOE |
Wechange Pleated Filter Cartridge Products List | ||||||
Membrane Material | Type No. | Application | Pore Size | Diameter | Length | Adaptor |
μm | mm | inch | ||||
PP | WF-PL-P-0100-05-* | Liquid Clarification, Liquid Filtration, Sewage Filtration, Security Filtration, Clarification Filtration, Beverage Pre Filtration, Microelectronic Liquid Pre Filtration, Photoresists Prefiltration, Organic Solvents Pre Filtration, Air Prefiltration. | 1 | 69 | 5" | The "*" Indicate type of CONNECTOR and SEAL RING, they're customizable and have below option codes: (Fluororubber) |
PP | WF-PL-P-0100-10-* | 1 | 69 | 10" | ||
PP | WF-PL-P-0100-20-* | 1 | 69 | 20" | ||
PP | WF-PL-P-0100-30-* | 1 | 69 | 30" | ||
PP | WF-PL-P-0100-40-* | 1 | 69 | 40" | ||
PP | WF-PL-P-0300-05-* | 3 | 69 | 5" | ||
PP | WF-PL-P-0300-10-* | 3 | 69 | 10" | ||
PP | WF-PL-P-0300-20-* | 3 | 69 | 20" | ||
PP | WF-PL-P-0300-30-* | 3 | 69 | 30" | ||
PP | WF-PL-P-0300-40-* | 3 | 69 | 40" | ||
PP | WF-PL-P-0500-05-* | 5 | 69 | 5" | ||
PP | WF-PL-P-0500-10-* | 5 | 69 | 10" | ||
PP | WF-PL-P-0500-20-* | 5 | 69 | 20" | ||
PP | WF-PL-P-0500-30-* | 5 | 69 | 30" | ||
PP | WF-PL-P-0500-40-* | 5 | 69 | 40" | ||
PP | WF-PL-P-0700-05-* | 7 | 69 | 5" | ||
PP | WF-PL-P-0700-10-* | 7 | 69 | 10" | ||
PP | WF-PL-P-0700-20-* | 7 | 69 | 20" | ||
PP | WF-PL-P-0700-30-* | 7 | 69 | 30" | ||
PP | WF-PL-P-0700-40-* | 7 | 69 | 40" | ||
PP | WF-PL-P-1000-05-* | 10 | 69 | 5" | ||
PP | WF-PL-P-1000-10-* | 10 | 69 | 10" | ||
PP | WF-PL-P-1000-20-* | 10 | 69 | 20" | ||
PP | WF-PL-P-1000-30-* | 10 | 69 | 30" | ||
PP | WF-PL-P-1000-40-* | 10 | 69 | 40" |
Polypropylene (PP) filter membrane is a kind of membrane material for deep filtration, stable physical and chemical properties, and good pressure resistance, often used for liquid clarification filtration.
1.Security filtration
2.Clarification filtration
* High flow rate, long life;
* The production environment is one hundred thousand dust-free clean workshop;
* High pollution tolerance;
* Strict quality control system, complete production process flow;
* Short delivery period;
* Flexible payment method: T/T, L/C, West Union, Paypal;
* Free technical support;
* Other specific sizes can be customized;
Dimensions(nominal):
OD | 69mm |
Length | 10"(254mm),20"(508mm),30"(762mm),40"(1016mm) |
Material of Construction:
Filter Media | Deflector layer | port | Enclosures/Ports | Seals Material |
Polypropylene | Polypropylene | Polypropylene | Polypropylene | Silastic/EPDM |
Beer Clarification Filter Cartridge Performance:
Biosafety | All ingredients comply with USP (United States Pharmacopoeia) Level 6 plastic testing |
Food Accessibility | All ingredients comply with GB 4806.7-2016 |
Executive Standard | Q/WCF 001-2021 |
Cleanliness | The product does not have any particles, fibers, or other foreign objects falling off |
The Maximum Work Temperature | 80℃(△P 0.1Mpa) |
Effective filtration area | ≥2.72 m2/40” |
PH | 1-14 |
Suggesting Renewal Pressure Difference | 0.2MPa |