Description of Pharmaceutical water/liquid prefiltration
WECHANGE PP membrane filters are high efficiency depth type filters constructed entirely of chemically resistant polypropylene. They are economical, premium quality products that deliver consistently high filtration efficiency, superior flow rates, substantial dirt holding capacity, and exceptionally long service life. All-polypropylene construction makes it a cost-effective choice for clarification and prefiltration applications.
WECHANGE PP membrane filters are ideal for clarification, polishing, bioburden reduction and prefiltration applications. It is compatible with a wide range of chemicals and cleaning agents.
Application of Pharmaceutical water/liquid prefiltration
Features of Pharmaceutical water/liquid prefiltration
Operating Characteristic of Pharmaceutical water/liquid prefiltration
Outer Diameter | 2.7”/69mm |
Length | 10”/254mm 20”/508mm 30”/762mm 40”/1016mm 60”/1524mm |
Pore Size | 1, 3, 5, 7, 10μm |
Max. Operation Temperature | 80℃ |
Max. Operation Pressure | Forward direction: 0.58 MPa(25±2℃) 0.24MPa(80±2℃) *It not recommend for reverse use |
Food Contactability | All ingredients are compliant GB 4806.7-2016 |
Filtration Areas | 5”≥0.34m²; 10”≥0.68m²; 20”≥1.36m² 30”≥2.04m²; 40”≥2.72m² |
Integrity Testing | Bubble point≥60KPa 50KPa pressure, diffusion flow<10 ml/min Anhydrous ethanol was used as the wetting solution at 25°C, and compressed air was used to test the bubble point values against the diffusion flows. |
Sterilization | 30 times (121.4℃,30 min offline high-pressure steam sterilization) |
Bacterial Retention Capacity | Minimum retention rate 107 CFU/cm2 The product was tested against Serratia marcescens (ATCC14756) using ASTM F838 method. |
Extractable Substance | <50 mg/m2 After high-pressure steam sterilization(121.4℃,60 min), 25℃±2℃ immersing in pure water for 24h |
Biosafety | The endotoxin level<0.25 EU/ml, and the extraction solution has no acute toxicity |
Cleanliness | No fibers or other visible foreign objects were detected in the filtered liquid. *Lamp test according to the Chinese Pharmacopoeia 2020 edition <0904> |
Filtration direction | Outside-inside |
Flow Rate of Pharmaceutical water/liquid prefiltration
Material of Structure of Pharmaceutical water/liquid prefiltration
Filter Media | Polypropylene |
Deflector Layer | Polypropylene |
Enclosures/Ports | High Temperature Resistance Polypropylene |
Adapter | Polypropylene |
Seals | Silicone/EPDM |
Naming Regulations of Pharmaceutical water/liquid prefiltration
WF | PL | P | 0500 | 10 | A | S |
Trademark | Form | Filtration Materials | Accuracy | length | Adapter | O ring |
WECHANFIB | PLEATED | P PP | 0100 1um | 5 5” | A 222/ FIN | S Silicone |
0300 3um | 10 10” | B 222/Flat | E EPDM | |||
0500 5um | 20 20” | C 226/ FIN | V FKM | |||
0700 7um | 30 30” | D 226/ Flat | T PTFE | |||
1000 10um | 40 40” | E DOE |
Wechange Pleated Filter Cartridge Products List | ||||||
Membrane Material | Type No. | Application | Pore Size | Diameter | Length | Adaptor |
μm | mm | inch | ||||
PP | WF-PL-P-0100-05-* | Liquid Clarification, Liquid Filtration, Sewage Filtration, Security Filtration, Clarification Filtration, Beverage Pre Filtration, Microelectronic Liquid Pre Filtration, Photoresists Prefiltration, Organic Solvents Pre Filtration, Air Prefiltration. | 1 | 69 | 5" | The "*" Indicate type of CONNECTOR and SEAL RING, they're customizable and have below option codes: (Fluororubber) |
PP | WF-PL-P-0100-10-* | 1 | 69 | 10" | ||
PP | WF-PL-P-0100-20-* | 1 | 69 | 20" | ||
PP | WF-PL-P-0100-30-* | 1 | 69 | 30" | ||
PP | WF-PL-P-0100-40-* | 1 | 69 | 40" | ||
PP | WF-PL-P-0300-05-* | 3 | 69 | 5" | ||
PP | WF-PL-P-0300-10-* | 3 | 69 | 10" | ||
PP | WF-PL-P-0300-20-* | 3 | 69 | 20" | ||
PP | WF-PL-P-0300-30-* | 3 | 69 | 30" | ||
PP | WF-PL-P-0300-40-* | 3 | 69 | 40" | ||
PP | WF-PL-P-0500-05-* | 5 | 69 | 5" | ||
PP | WF-PL-P-0500-10-* | 5 | 69 | 10" | ||
PP | WF-PL-P-0500-20-* | 5 | 69 | 20" | ||
PP | WF-PL-P-0500-30-* | 5 | 69 | 30" | ||
PP | WF-PL-P-0500-40-* | 5 | 69 | 40" | ||
PP | WF-PL-P-0700-05-* | 7 | 69 | 5" | ||
PP | WF-PL-P-0700-10-* | 7 | 69 | 10" | ||
PP | WF-PL-P-0700-20-* | 7 | 69 | 20" | ||
PP | WF-PL-P-0700-30-* | 7 | 69 | 30" | ||
PP | WF-PL-P-0700-40-* | 7 | 69 | 40" | ||
PP | WF-PL-P-1000-05-* | 10 | 69 | 5" | ||
PP | WF-PL-P-1000-10-* | 10 | 69 | 10" | ||
PP | WF-PL-P-1000-20-* | 10 | 69 | 20" | ||
PP | WF-PL-P-1000-30-* | 10 | 69 | 30" | ||
PP | WF-PL-P-1000-40-* | 10 | 69 | 40" |
The PP pleated filter cores utilize a variety of technologies including microporous filtration, deep bed filtration, and adsorption filtration to effectively remove suspended particles, microorganisms, and organic matter from the water, ensuring the purity of the water; after rigorous performance testing, the equipment is guaranteed for stability and reliability under various conditions.
1.Medical wastewater filtration
2.Biological product clarifying filtration
3.Blood product filtration
* Select materials that are resistant to corrosion and have strong chemical stability as the filter medium to ensure that no chemical reactions occur between the water, drug solutions, or the filter medium during the filtration process, thereby maintaining the quality and safety of the final product.
* Offer a larger filtration area, allowing the same volume of filter to have a higher filtration efficiency and faster filtration speed compared to traditional filters.
* Utilize environmentally friendly materials and designs to reduce resource consumption and waste production, aligning with the modern pharmaceutical industry's requirements for sustainability.
* Strict quality control system, complete production process flow;
* Short delivery period;
* Flexible payment method: T/T, L/C, West Union, Paypal;
* Free technical support;
* Other specific sizes can be customized
Dimensions(nominal):
OD | 69mm |
Length | 10"(254mm),20"(508mm),30"(762mm),40"(1016mm) |
Material of Construction:
Filter Media | Deflector layer | port | Enclosures/Ports | Seals Material |
Polypropylene | Polypropylene | Polypropylene | Polypropylene | Silastic/EPDM |
Beer Clarification Filter Cartridge Performance:
Maximum working temperature | 80℃ |
Maximum working pressure | Forward: 0.5 MPa (25 ± 2℃) 0.2MPa(60±2℃) This product is not recommended for reverse use |
Filter area | ≥ 0.68 m 2 / 10 inch ≥ 2.04 m² / 30 inch |
Steam sterilizing | 30 times (123℃, 30 min off-line high pressure steam sterilization) |
pH range | 1-14 |
Extractive substances | <50 mg/m2 After autoclave sterilization (123°C, 60 min), the cells were immersed in pure water at 25°C±2°C for 24 hours. |
Biosafety | Endotoxin was lower than 0.25 EU/ml, and the extract had no acute toxicity. |
Merit rating | Fibers and other visible foreign matters were not detected in the filtrate. According to the lamp inspection method stipulated in the 2020 edition of〈Chinese Pharmacopoeia〉. |
Food accessibility | All components were consistent to GB 4806.7-2016 |