ISO9001 IP54 Elevator Door Sensor Transistor Output 4m Detecting Range Sensor

Introduction
WECO elevator door sensor has three series which is 917 series, 957 series, and 987 series. 957 Series and 987 series are updated models based on 917 Series.

the Door sensor is adopting infrared light reflecting principle, when elevator doors are interrupted by obstructions, a signal will be sent out from door detectors, door operators will receive this signal and control the door opening. With advanced production management and strict quality inspection, WECO door detector has become the first brand in the world, providing reliable guarantee of passengers’ safety.

Specifications

Mounting Holes and Dimension

Package
Every piece packed in tube,five tubes in a bundle;
Each tube includes:
Power supply control unit:(1pieces)
Durable flexible cable: (2cables)
Transmitter: (1pieces)
Receiver: (1pieces)
User Manual: (1copy)
Mounting accessories: (1 set)

What is EN81-20 stndard?
EN81-20 New Euro Standard means requirements (for elevator door detector)
1. detecting height range: the lowest≤20mm, the highest≥1600mm.
2. minimum obstructions 50mm, the distance of diode sets must less than 50mm.
3. When distance of door detectors less than 20mm, it allows to be invalid.

Design of door detector (Solution)
1. range of diodes less than 47mm, the number of diodes should be at least 35 or more than 35
2. lowest detecting point:17mm
3. higest detecting point:17+47*34=1615mm. (take 35 diode sets as example)
4. detecting range is 0—4m
5. continuous detectable minimum obstructions is 50mm

Does WECO elevator light curtain compliant to EN81- 20 standard?
The answer of courer is YES. The light curtain witht no less than 36 diodes is compliant to EN81-20 Standard.
So the diodes more than 36dioes of models of 957 series is compliant to new standard.

Difference between 957Series and 987 Series is:
987series elevator light curtain has fault output signal function.