Smooth 20um Slotted Screen Wastewater Treatment Slotted Liners
Slotted liners are manufactured by laser cutting process without contact operation. This process can effectively avoid undesirable factors which will cause the deformation of the base pipe. Laser cutting process uses windows interface for easy operation and accurate calculation.
Slotted Screen Main Specification:
- Perfect roundness
- Smooth wire surface
- Minimum slot: 0.02mm (20um)
- Minimum diameter: 16mm
- Maximum length: 6000 mm
- Profile wire size: 0.75x1.5mm, 1.0x2.0mm, 1.5x2.5mm, 2.0x3.0mm, 2.0x4.0mm, 3.0x5.0mm
- Support rod size: 2.0x3.0mm, 3.0x5.0mm, 5.0x8.0mm
Profile wire | Support Rod |
0.75*1.5mm | 2*3mm |
1.0*2.0mm | 2*3mm |
2.0*3.0mm | 3*5mm |
2.0*4.0mm | 3*5mm |
3.0*5.0mm | 3*5mm |


Application:
Petrochemical, wastewater treatment, pulp & paper, fine chemical, food and beverage, paints and inks, Pharmaceutical, mining...
Advantages of Slotted Screen ?
- High-precision slot opening: Minimum Slot opening is 20 microns.
- Smooth Surface Filtration: very good smooth filtration surface, which reduce mechanical wear.
- Non-clogging construction: The v-shaped wires and support rods is welded together by automatic resistance welding, which ensures a two- point contact between the particles and the slot,which minimizes clogging of near size product.
- Strong construction: for most applications the wedge wire is self-supporting because of the welding at each intersection and can therefore withstand high pressure(Psi) and heavy loads.