WEEM 200mm x 750mm Zirconia Sanding Belt / Floor Sanding Belts
Quick Detail:
WEEM 3126-11 200mm x 750mm Floor Sanding belts are designed for floor sander machines, like: Lagler-Hummel, Prosand, Galaxy 2000 and so on.
Description:
WEEM 3126-11 Floor sanding belts are use Y weight polyester coated Zirconia gain product. It is built with self-sharping Zirconia gain, resin over resin, close coated on durable, and heavy duty y weight waterproof polyester backing. It is making into size of 7 7/8" x 29 1/2 " (200mm x 750mm), the right size for floor belt sander machine.
Self-sharping Zirconia gain heavy duty structure requires heavier pressure to break down the self-sharpening grains. It is ideal for heavy grinding on hard woods. This abrasive can last up to 5 times longer than aluminum oxide on tough applications for heavy stock removal to finishing sanding.
A closed coat product has a higher number of abrasive cutting points per square inch and results in higher stock removal rate and longer time before the abrasive wears out. Normally results in a better finish.
A strong bi-direction tape splice is used on the joint of WEEM 3126-11 floor sanding belts
Tap on butt line joint: as default
Specifications:
Part Number: | 3126-11 |
Backing: | Y weight waterproof polyester |
Treatments: | Anti-static |
Coated: | Close coated |
Bond: | Resin over resin |
Grain: | Zirconia |
Grit: | P36/P40/P60/P80/P100 |
Width: | 7 7/8" / 200mm |
Length: | 29 1/2 " / 750mm |
Applications:
Wood Floor sanding, Belt sander
Suitable:
It is made for floor belt sander such as: Lagler-Hummel, Prosand, Galaxy 2000, and etc. Fast cut sanding and excellent performance.