Build-in Printer Shovel Loader Indicator, Big Dispaly On Board Weighing Systems For Wheel Loaders

NEW Shovel Loader Weighing Controller BST106-N59[B] is with metal oil pressure sensor pipe and metal position sensor pipe. It can be extend its service life effectively. There are some point need to be paid attention to when making order:

1. If you need longer pipe, pls tell us exact length when making order;

2. If the three-way joint of your loader is special, please tell us the model number the loader you want o install or please send us the detail information of theree-way jointyou need;

3. Standard configuration is with built-in printer, if you want to connect a printer externally, that is ok, just tell us when making order please.

What product does the whole set include?

1. 1 Weighing indicator with Built-in thermal printer.
2. 1 Position sensor.
3. 2 Oil pressure sensors.
4. 2 Plate type three-way joints.
5. 1 Mounting fitting.

BST106-N59[B] Suitable for the wheel loader series with loading capacity 1~12t.

Specifications of Position Sensor

1. HALL Type Proximity Switches
2. Operating Voltage: DC5~24V.
3. Detecting Distance: 1~8mm.
4. Response Frequency: 5KHz.
5. Quiescent Current:Max. 2mA.
6. Thread Size: M8×1mm.
7. Service Temperature: -25℃~+70℃.
8. Protection Level: IP67.

Standard Detecting Target

1. Permanent magnet.
2. Outline Size: 30×10×5mm [L×W×T].

Specifications of Oil Pressure Sensor

• Operating Voltage: DC5V.
• Capacity: 0~25MPa.
• Accuracy: ±0.1%FS.
• Output Sensitivity: 2mV/V.
• Zero Drift: ±0.015%FS/℃.
• Safe Overload: 120%FS.
• Thread Size: M10×1mm.
• Service Temperature: -40℃~+125℃.
• Protection Level: IP67.

System Accuracy

• Accuracy Grade: III.
• Verification Accuracy of Weighing Indicator: 0.02%.
• Accuracy of Single-Bucket-Weight: 0.5%~1.0%.
• Accuracy of Totalized Loading Weight: 1.0%.

Technical Specifications:

Mode Of Delivery:

FAQ:

1. What detailed information do I need to provide if I want to place an order?

We need to know the following information: the model number of the loader you want to install, the shape and size of cylinder joint of your loader, the weight of single bucket, accuracy etc.

2. Do you have any discount?

Yes, if you buy large QTY, please send us a email, we will give you a big discount.

3. What terms of payment are available?

We accept T/T, L/C, Trade assurance, Secure payment, Western Union,etc.

4.When will you arrange the production?

We will arrange the production immediately after receiving your payment.

5. How do you ensure good product quality?

We have a complete quality control system, all of our products are fully checked by IQC, OQC departments before shipping to our clients.

Build-in Printer Shovel Loader Indicator, Big Dispaly On Board Weighing Systems For Wheel Loaders