Multi-Stages Fine Wire Drawing Line Pulley Type Wire Drawing Machines For Nails

Wire Drawing Machine Introduction

This wire drawing machine is widely used.The diameter of the inlet wire is very thick, which can be 8mm or 6.5mm wire rod,the outlet wire diameter can be very thin.This machine belongs to pulley type wire drawing machine.Different diameter needs to be equipped with different number of wire drawing spools.The diameter of the spool is usually 550mm.Each spool has one motor,and the motor is a variable frequency motor.So the machine running speed is adjustable.

Wire Drawing Machine Feature

1. Precise design, easy operation.

2. High speed and stability fitting your goal of efficiency.

3. Made from high quality material, undergoing high abrasion-resistance and low deformation heat treatment process, the machine is endurable with long time preciseness.

4. The forced feed lubricator guarantees oil-film lubrication of the rubbing parts and ensures the lasting use of the machine.

Wire Drawing Machine Advantage

1. The wire drawing spool is made of cast iron, or the surface is inlaid with alloy. Especially wear-resistant, pull out the smooth surface of the wire.

2. Each spool has one motor which the speed of the motor is adjustable.

3. The machine has control system,it has buttons on the control panel.Easy to learn and operate the machine.

4. The wire drawing machine is a hole wire drawing line.Put the raw materials of wire rod into the machine, and after the processing of the machine, the finished product is the wire roll with the required diameter.

5. The machine is equipped with an automatic coiling spool, and the drawn wire will automatically coil into the spool.

Wire Drawing Machine Parameter

Specifications: Modle: TK-BSJ6.5

Diameter of the spool(mm): 550

Four vinked pots

Drawing range: 6.5--2.2mm

Speed of the spool: 27-168rpm

Power of a single machine: 11kw (4 sets) 1.5KW( one sets)

Power motor: five

Output: 15 T/day

Rotation Pattern: Gear Rotation

Weight : 1400kg

Overall dimensions(LxWxH): 4550x1685x2100mm

Wire Drawing Machine Application

TK-BSJ6.5 wire drawing machines, drived by gears, are capable of drawing rod wires of high-,medium-,low-carbon steel,copper,aluminium,ect.and appliable to manufacturing industries such as wood screw,nail, conducting wirerope for electrician use,spring,etc. With electrical control,this kind of machine is safe in operation,low in noise,and high in efficiency.

Wire Drawing Machine Display

The wire drawing spool is made of cast iron or alloy.It is very wear resistant.

Different diameter needs to be equipped with different number of wire drawing spools.

The parts of the machine are polished with cast iron, no deformation, no leakage, very good mechanical performance

End product of wire