Reinforcing Steel Mesh Panel Welding Machine Description

This machine has a high degree of automation. The machine is designed by our professional designer, which is composed of warp wire pay off frame, straightening wheels device, buffer storage frame,main welding machine, weft wire storage bin, mesh pulling device, precision automatic mesh cutting machine and automatic mesh panel falling device.

Reinforcing Steel Mesh Panel Welding Machine Technology

1. The warp wire feeding is wire coils.Each wire pay off frame can bear 1 ton wire.No frequent feeding.

2. The Straightening wheels device is used to straighten the warp wire from the wire pay off. So the finish mesh panel surface is very flat.

3. Different from common steel mesh welding machine, this machine is equipped with warp wire buffer storage frame. After straightening, the warp wire enters the buffer storage rack, and then enters the main welding machine for welding. The warp wire is wound in the form of ring on the buffer storage frame, and then plays a buffer role in the feeding process, reducing the dynamic impact on the main welding machine and the drawing servo motor, ensuring the normal and uniform feeding of the warp wire and the normal operation of the machine at the fastest speed.

4. The weft wire need to be pre straightening and cutting.The weft wire storage bin can store 1 ton material without frequent feeding.which reduces the labor intensity and improves the output.

5. When the steel mesh which is welding reaches the length set in advance,the mesh cutting machine will cut the mesh to panels.

6. After being cutting,the panels will fall onto the platform.

Reinforcing Steel Mesh Panel Welding Machine Advantage

1. Our electric control cabinets all use world-famous brand electronic components.Taiwan brand reducer, Japan brand PLC control system and servomotor, French brand and Sweden brand switch..

2. Because this machine is full automatic machine,it only need one worker to operate this machine.

3. The welding electrode is made of high-quality high chromium copper, which is wear-resistant and has long service life.

4. The machine has an automatic alarm device. When the machine is short of material, or reaches the set output, it will alarm or stop automatically.

Packaging of Reinforcing Steel Mesh Panel Welding Machine

1. The bracket and auxiliary equipment is wrapped with plastic film. The spare parts is put in carton box.

2. The main machine will be fixed in the container by steel wire rope to make it stable.

3. It need one 20 feet or 40 feet container to shipment.