358 Anti Climb High Security Fencing In Green Color Wire Mesh Fence Machine

Wire Mesh Fence Machine Description

The 358 anti climb high security fencing wire mesh fence machine is also called fence mesh welding machine. It is one kind of the mesh fence welding machine.Because the 358 anti climb high security fencing is very special in specification.The wire mesh hole is 12.7*76.2mm,or 12.5*75mm. The machine is full automatic welding,it belongs to multi-point welding machine.All the welding points in the weft wire will be welded one time.The

Wire Mesh Fence Machine Technology

1. The welding machine is PLC control,it adopts visual touch screen,easy for the worker to operate.

2. Both the warp wire and weft wire are pre straightening and cutting,so the mesh surface is flat after being welded.

3. The machine has water cooling transformers to ensure the machine can work in high temperature continuously,prelong the service life.

4. The machine can equip warp wire sending device,this device is optional.The device uses cylinder to clamp the warp wires, and the servo motor is used to send the warp wires to the welding position.When the machine is welding,the worker can prepare the warp wires for the next panel.

5. The weft wire is falling automatically in the wire hooper.The weft wire spacing is input on the touch screen,very easy to operate.

358 Anti Climb High Security Fencing Application

358 anti climb high security fencing is popular in southeast Asian countries, especially Malaysia.Because the mesh hole is very small,it's hard for fingers to get through the mesh hole.has a good defense function.The mesh used to make fence mesh,road mesh,reinforcing mesh,shelf,explosion-proof wall etc.

Wire Mesh Fence Machine Parameter

Our Service

Generally speaking, there will be no problem after finish installing. In case you have any problem. You can contact our sales at any time. Our engineer will take a solution video according your description.

1. Maintenance period: 1 year

2. Oversea debug service:

If the buyers need, we can send our technical staff to the buyers’ place to debug the machine and providing the training in 15 days after the machines arrive at the destination port.

3. About debugging fees: Visa, round trip tickets, restarante, accomodation,engineer salary all need pay by buyer.

4. The training fees: free training within debugging days

5. The numbers of technical persons: 1 or 2 technician

6. After the maintenance period: If you need the machine parts, we will provide it as our cost.

Wire Mesh Fence Machine Product