15cm Width,White Color 145g Fiber Mesh For Wall Reinforcement Materials
Introduction
The mesh cloth is woven with medium alkali or alkali-free glass fiber yarn and coated with alkali-resistant polymer emulsion. Mesh cloth series products: alkali-resistant GRC glass fiber mesh cloth, special mesh and stone mesh cloth for alkali-resistant walls, and marble back-pasted mesh cloth.
Construction method
1. Keep the walls clean and dry.
2. Put tape on the cracks and press tightly.
3. Make sure that the gap is covered by tape, then use a knife to cut off the excess tape, and finally apply the mortar.
4. Let it air dry, then lightly sand.
5. Fill enough paint to make the surface smooth. 6. Cut off the leaking tape. Then, notice that all the cracks have been properly repaired, and use fine composite materials to modify the surrounding areas of the joints to make them look as clean as new.
Fiberglass Mesh Specifications | | |
Aperture Size(MM) | Weight/Square Meter | Width | Length |
4x4mm | 45g-300g/m2 | 0.1-2.8m | 30-100m |
5x5mm |
6x6mm |
8x8mm |
Purpose:
repair dry board walls, gypsum board joints, various wall cracks and other wall damage Glass fiber self-adhesive tape Glass fiber self-adhesive tape Main performance: excellent alkali resistance, durability: high tensile strength and deformation resistance, anti-crack: no deterioration, no foam: excellent self-adhesiveness, No need to apply primer in advance, it is quick to use and easy to apply.
