We all know that Nabtesco of Japan is the world's manufacturer of precision cycloid gearbox reducers, and its reducers account for more than 60% of the world's share.

In China, the largest precision cycloidal pinwheel gearbox RV reducer manufacturer is Genius Robotics Zhenkang, and we only specialize in precision cycloidal pinwheel RV reducers. Compared with other Chinese RV reducer manufacturers, we are more professional, our company's precision Cycloid pinwheel RV reducer is the same as Nabtesco reducer, and its speed ratio, accuracy, size and noise are consistent with Nabtesco.

What are the characteristics of the precision cycloidal pinwheel gearbox RV reducer?

The precision cycloidal pinwheel gearbox RV reducer is a high-precision control reducer that adopts a planocentric reduction structure. Because the speed reducer has a large number of gears at the same time, it has the characteristics of small size and light weight, but also has the characteristics of high rigidity and overload resistance.

In addition, the gap, rotational vibration, and inertia are small. Therefore, it has good acceleration performance, can realize smooth operation and obtain correct position accuracy.

Common application areas include manipulators, machine tools, assembly devices, handling devices and other fields.

Genius Robotics Zhenkang's cycloidal gearbox reducer, like the Nabtesco cycloid gear reducer, includes a patented two-stage reduction design, which can provide greater torque, and provide high reduction ratio and high impact resistance while ensuring high precision and light weight. Load capacity.

The precision cycloidal pin wheel RV uses the unique pin teeth and RV gear structure of the cycloidal design with rolling contact parts to reduce wear, extend the service life, and reduce backlash, making it more resistant to impact than traditional reducers, and further Reduce backlash.

The precision cycloid gearbox reducer is also equipped with a set of large internal angle bearings to achieve greater load capacity in order to reduce the need for external support equipment-thereby reducing design time and installation costs.

The actual symmetrical gear design and all shafts supported by ball bearings guarantee constant performance during the service life and allow the peak value to reach 5 times the rated torque in a short time (for example, during an emergency stop).

Cycloidal Gearbox Design advantage

The integrated angular bearing increases the rigidity of the reducer and realizes the ability of the reducer to support larger external loads. Therefore, the need for external support equipment is reduced, the number of parts required is reduced, the reliability is increased, and the total cost is reduced.

The 100% continuous meshing design of the cycloidal gear and the pin teeth can achieve a larger impact load capacity and a smaller backlash, because the force is evenly distributed to the entire reducer gear.

The patented two-stage reduction mechanism reduces vibration because the two cycloid gears are rotating at a lower speed, and the reduced input shaft size reduces the inertia. Various reduction ratios can be obtained by simply changing the first-stage spur gear combination.

The use of rolling contact parts in the reducer is beneficial to achieve excellent starting efficiency; reduce wear, obtain longer service life and reduce backlash.

1. Large transmission ratio range.

2. The torsional rigidity is large, the output mechanism is the planet carrier supported at both ends, and the output is output by the rigid large disk at the left end of the planet carrier. The large disk is connected with the working mechanism by bolts, and its torsional rigidity is much greater than the general cycloid pin wheel planetary deceleration The output mechanism of the device. Under the rated torque, the elastic return difference is small.

3. As long as the design is reasonable and the manufacturing and assembly accuracy is guaranteed, high precision and small gap backlash can be obtained.

4. High transmission efficiency.

5. When transmitting the same torque and power, the volume is small (or the load capacity per unit volume is small), the precision cycloid pin wheel RV reducer uses three planetary gears in the first stage, especially the second stage, cycloid The pin wheel is hard-toothed and multi-toothed, which in itself determines that it can transmit large torque with a small volume. In addition, in the structural design, the transmission mechanism is placed in the main bearing of the planet carrier to make the shaft The overall size of the transmission is greatly reduced, and all the above factors have greatly reduced the total volume of the transmission.

If you need to buy a precision cycloidal pinwheel RV gear reducer, please feel free to consult and contact our company sales@geniusrobotics.cn,

whatsapp: +86 15800366487