Hydrulic Fit Up Pipe Welding Rotator , Welding Pipe Stand Roller 60T For Automatic Circle Seam Welding

Attention On Pipe Welding Rotator Using

1. Movable Pipe Welding Rotator can auto move on the rails for the third single pipe butt welding.

2. Pipe Welding Rotator will be controlled by Hand Remote Control Box or Wireless Control Box.

3. During two single pipes butting , the position could not butt well sometimes , our rotators can adjust the

butt position up or down / left or right to realize the perfect butt position.

4. Two self aliging Pipe Welding Rotator in the two end, and two hydrulic adjust rollers in the middle to adjust the butt positon.

Pipe Welding Rotator Supply Ranges

1. Consist : One powered roller , One idler roller , Two Hydrulic Adjustment Roller , Electric control system

2. Adjust way : Adjust the pipe diameter automatically with diameter 750 - 4800 mm

3. Voltage : 110V - 600 V 50 / 60 Hz 1P / 3P all available

4. Pipe Welding Rotator Control Way : Remote hand control box / Wireless hand control box

5. Roller Material : Rubber / Steel / PU ( Polyurethane roller for Nonferrous Metals )

6. Original : Our factory / Wuxi China

Pipe Welding Rotator Specification

Pipe Welding Rotator Applications

1. For pipe support and turning for auto seam welding

2. To make wind tower

3. For auto circle seam welding

4. Pipe Welding Rotator Controlled by foot pedal / hand control box

More Questions Customers May Concerned

Q : What about the transportion?

A : 1. Fully packaged in wooden case to anti damage during the transportational process .

2. Usually we take seaway ,cause its more convenient and cheaper for big machine.

3. Door to door delivery service is also available for Pipe Welding Rotator transport.

Q : What is your warranty and after sale service ?

A : 1. All our equipments with One Year Warranty time , fully test at our work shop before delivery.

2. If you have any questions on the installation , you will get our engineers respond within 24 hours.

Pipe Welding Rotator Details Control system and Brand

1. Inverter is from Taida / Yaskawa Brand

2. Motor is from CE Invertek Brand

3. Reducer is from Cable. Made in China.

4. Electric system is from Schneider

Our suggestion

1. Normally under 60 T model we use the Rubber material rollers , upper we use Steel material rollers.
2. If your work piece material is Nonferrous Metals , we suggest PU rollers.
3. Self-aligning Pipe Welding Rotator / Bolt adjsutment / Lead Screw adjustment / Fit up rotators all available.

DO NOT HESITATE ! JUST SEND US YOUR INQUIRY NOW.