Head Gasket: This is just the head gasket. If you need all of the gaskets for the upper half of the engine use a Head Set.
3304 (OE# 7N7386) Cylinder Head Gasket
Item Number: H7N7386
Manufacturer: Reliance
Reference No: H7N7386
3306 (OE# 6N7263) Cylinder Head Gasket
Item Number: H6N7263
Manufacturer: Reliance
Reference No: 6N7263
3406E (OE #1539653) Cylinder Head Gasket
Item Number: H1539653
Manufacturer: Reliance
Reference No: 1539653
Head bolts marked with arrows are 216mm (8.5") long. The other bolts are 194mm (7.6") long. It is recommended to use a moly paste ( # 6V4876) on all bolt threads. Without it you will not reach the proper torque value.
1. Torgue bolts 1 through 26 (in sequence) to 200 ft/lbs (plus or minus 11 ftlbs)
2. Torgue bolts 1 through 26 (in sequence) to 333 ft/lbs (plus or minus 15 ftlbs)
3. Torgue bolts 1 through 26 (in sequence again) to 333 ft/lbs (plus or minus 15 ftlbs)
*Cylinder Head deck straightness should be within .13mm (.005") overall. The maximum warp spec is .03mm (.001") over any 76.2mm (3.00") span.