6.5L 150 Watt Ultrasonic Cleaner Electronics For Soldering PCB Board

Why You Need Whale Cleen sonic Ultrasonic Cleaner Electronics For PCB Board? ​

Ultrasonic cleaners have proved highly effective in cleaning PCBs, and the process is far superior to manual processes that involve soaking and scrubbing using high purity alcohol, flux removal sprays, and biodegradable solvents. By contrast, these time-consuming manual processes risk damaging delicate components and frequently fail to completely remove contaminants. This article explains why requiring ultrasonic cleaning can be an important factor when evaluating PCB suppliers. It describes elements that contribute to properly employed procedures and presents questions to ask regarding equipment, cleaning solution chemistries, and the care and maintenance of equipment.

Data Sheet Of Z-S031:

Customer Cleaning Feedback:

How It Works?

Ultrasonic cleaner for circuit boards and the technology works on the rule of cavitation that occurs when small microscopic bubbles formed, falls violently on the cleaning surface. Consistent creation and falling in of the bubbles work as a scrubbing agent, which in turn cleans the product.

Majority of the people have the wrong credence that the PCBs should not be immersed in fluid; however it is not right.

For effective cleaning results, PCB or electronic part (to-be cleaned) should be immersed in the tank filled with cleaning solution. Later these should be cleaned in proper chemical cleaner with water and dried up appropriately for safer outcomes.

The ultrasonic parts cleaner machine operates at the frequency of 20-400 Khz allowing safe cavitation cleaning action that reaches all parts of the surface for cleaning the PCB.

The overall process hardly takes 10-15 minutes and saves your lot of time and money since you can own this machine at a very affordable price online.

Furthermore, one can rest assure about the protection of their electronic parts as most of the units are provided with “auto sweep” function that eliminates any potential damaging that other way could be possible.

You can also use the cleaner to clear PCBS after wave bonding, so you can easily begin after the bonding procedure. However, ensure that you permit the boards to cool less than 70 degree before beginning the cleaning process.

Recommendation:

Ultrasonic cleaners such as the Whale Cleen sonic Digital series are ideal for cleaning and restoring these electronic components. Bench and tabletop Elmasonic units are offered in tank capacities up to 30L of cleaning solution for use in electronics parts and service stores. The D series operates at an ultrasonic frequency of 40 kHz (40,000 cycles per second) providing safe cavitation cleaning action that reaches all PCB and equipment housing surfaces.

For larger operations such as PCB manufacturing facilities, industrial-sized floor models equipped with PCB racks to hold multiple boards are available from Whale Cleen sonic.