3KW 175 Liter Ultrasonic Cleaning Engine Block Machine With Two Tanks

How Ultrasonic Cleaning Engine Block Machine Works?

The stainless steel cleaning tanks are ultrasonically driven by transducers that are generating ultrasound waves that vibrate the cleaning fluid at very high velocity, creating the cavitation process. Millions of tiny bubbles implode within the solution and penetrate into every orifice of the item being cleaning, removing dirt and grime within seconds.

The transducers are high quality produced to a unique patented design that minimizes cavitation erosion and provides high energy all round cleaning performance operating at a frequency of 30 kHz +/- 2. The system features unique ultrasound “bar” transducers opposed to “cone” transducers resulting in 50% greater contact area with the outside surface.

The powerful generator system offers a patented frequency sweep for uniform and intense cavitation. With its efficient energy transfer the generator requires no forced air cooling and directs energy directly into the transducers.

Specification Of LanJ-J212X And Related Model

Customer's Cleaning Feedback:

The benefits If You Use Ultrasonic Cleaning Engine Block:

The first benefit of using ultrasonic cleaning is the timescale for cleaning items.

Another major benefit of ultrasonic cleaning is its ability to reach hidden areas. As was previously stated, cavitation will occur anywhere where water particles can reach. This means that items such as cylinder heads, which have a number of internal channels, will be thoroughly cleaned throughout. The cleaning fluid will flood these channels enabling the scrubbing action to work in even the deepest and smallest spaces.

Although there are a number of sprays available which break down carbon deposits, they do not have the ability to completely remove carbon in the same way as an ultrasonic cleaner dose.

Ultrasonic cleaning is particularly useful for cleaning items such as engine block and carburettors. Cavitation will occur inside the injector nozzle or carburettor, breaking down debris that have built up inside, resulting in an injector which sprays out a perfectly conical shape fuel jet, and a carburettor which has maximum air/flow resulting in better fuel efficiency and soother torque and power curves.

Another common cleaned item id brake caliper – over time the seals on the pistons can become worn allowing dirt to lodge around the piston, when this occurs the caliper will require reconditioning, and an ultrasonic cleaner is the perfect method to use to ensure that no traces of grit are present prior to installing the new piston seal. It will also clean off carbon dust which has built up from the brake pads leaving the calliper in almost new condition. By removing the bleed nipple prior to placing the caliper in the tank and allowing the chamber to fill with water it will also mean that the internal areas will be cleaned – any debris which have become lodged in the inlet or within the chamber itself will be broken down and removed leaving the caliper free from potential blockage problems.