2500ml 50Watt Ultrasonic Dental Tool Cleaner With 50W Heating Power

What Is Ultrasonic Dental Tool Cleaner?

To keep things simple:

Ultrasonic dental tool cleaners use high frequency sound to vibrate a water bath. The rapid agitation of the water can get dentures clean down to the microscopic level.

In order to be considered ultrasonic the device must be able to operate at above 20,000 Hz. At this point, tiny bubbles are formed that quickly rupture. As they do, small but powerful shockwaves are emitted. This is where the power of ultrasonic cleaners lie.

Similar cleaners that don’t reach 20,000 Hz are referred to as sonic cleaners. Unlike ultrasonic cleaners, you can usually hear them humming. While they do provide some benefit, they are not nearly as effective on the microscopic level as ultrasonic cleaners.

In case you didn’t know, it’s important to get your dentures clean, really clean.

Data Sheet Of LanJ-2500:

Customer's Feedback:

The Role of Ultrasonic Cleaners in Dental Clinics:

The American Dental Association calls attention to ultrasonic cleaning in their publication Sterilizing and Disinfection of Dental Instruments by noting that "(ultrasonic cleaners) may be used to reduce direct handling of dental instruments." The publication points out that a major hazard of manually handling sharp or pointed dental tools is risking inadvertent punctures or cuts that could lead to an infection.

The Centers for Disease Control's Guidelines for Infection Control in Dental Health Care Settings states that "removal of debris and contamination is achieve either by scrubbing…or by an automated process (e.g. ultrasonic cleaner or washer-disinfector) using chemical agents. " The CDC further notes that if visible debris is not removed it will compromise the sterilizing or disinfecting steps.

The Association of Surgical Technologies goes into more detail in their Standards of Practice for the Decontamination of Surgical Instruments. Section V of the AST publication places on the healthcare facility the decision on whether to use an ultrasonic cleaner. Here we summarize some of the points they relate to using the technology:

1. Cleaning instruments and devices not considered safe for handling by healthcare workers

2. Pre-rinsing instruments to remove gross contaminants before the ultrasonic cleaning process

3. Changing the cleaning solution every 8 hours or when visibly "dirty"

4. Using a low-foaming cleaning solution formula

5. Following the operating instructions provided by the ultrasonic cleaner manufacturer

We'll go into more detail on operating recommendations later in this post but first let's take a look at