900W 53Liter Ultrasonic Carburetor Cleaner For Automotive Repair Shop

Why You Need Ultrasonic Carburetor Cleaner?

Ultrasonic cleaners are latest cleaning appliances, which people are not ve acquainted with. So, you need to know some things before taking any decision and going for the market. Before perusing this list of best ultrasonic cleaner for carburetors, one has to know why he needs an advanced sonic cleaner. If one surfs the net, one will be easily convinced about a purchase by reading tons of ultrasonic carburetor cleaner reviews. But is his purpose really worthy of providing it with a sonic cleaner? Can it not be served in other ways so that money could be saved? Well, this is th uniquee first thing to decide.

Ordinarily, normal detergent cleaning is liked by most of the people. Though it serves quite a bit, yet it cannot clean totally, specially the delicate appliances like medical equipments, jewelry, carburetors etc because their design includes many cracks, rifts etc on their body Among them, things like carburetors are more tough objects to deal with because it is used in dirtiest and filthiest surroundings possibly. That is why it becomes even more dirtier than any other machinery product. Average water cleaning is not sufficient for such articles. For example, it cannot reach the remotest part of the carb where it is too greezy and dirty. That part remains untouched and continues to be stained, thus loses its durability. The sonic cleaners, on the other hand , uses sonic powers into the solution to create sufficient movement of the liquid for removing every contaminant from every difficult part.
Data Sheet Of Z-X18:

Customer's Cleaning Feedback:




How To Clean Carburetor With whale cleen Ultrasonic Carburetor Cleaner?

Here' a suggested procedure that you will refine based on your own experience.

But first a tip:
It’s a good idea to pre-clean grossly contaminated parts – i.e. scrape off heavy carbon buildup, mud and similar contaminants. This helps preserve the useful life of the solution.
Also note that solution will be displaced by parts being cleaned so once the solution is prepared you may have to drain off a quantity and set it aside. When operating, the tank should not be overfilled or under filled. As with all ultrasonic cleaning procedures, practice helps develop your process.

Four Steps To Prepare For The Cleaning Cycle:

• 1.Use an ultrasonic cleaning solution concentrate formulated for cleaning carburetors and similar motorcycle engine parts. A good example is mildly alkaline biodegradable cleaning solvent diluted to 1 to 5% with water. It is formulated to clean carburetors, engine parts, gears, bearings, fuel injectors and sport and recreation power equipment when diluted with water.

• 2.Fill your ultrasonic cleaner tank half way with water, add the correct amount of cleaning solution concentrate for a full tank then add water to the fill line.

• 3.Before cleaning turn on the unit and heater then and allow it to operate for 10-20 minutes to degas the solution. This removes cavitation inhibiting trapped air and it must be done each time you prepare fresh cleaning solution. (Some cleaners are equipped with a degas mode.)

• 4.Adjust the thermostat to the suggested cleaning solution temperature. For elma tech clean A4 it is 50 to 80⁰C (120-175⁰F).