150W Ultrasonic Vein Deposition Carbon Cleaning Equipment For Cleaning Carbon On The Engine

Quick detail of Ultrasonic Vein Deposition Carbon Cleaning Equipment

Power Supply: 110V/220V

Power (W): 150W

Use: Cleaning carbon in the engine room without taking apart the engine.

Function: Ultrasonic cleaning and pulse cleaning

Working Noise: less than 70db

Description of Ultrasonic Vein Deposition Carbon Cleaning Equipment

The combustion chamber of the engine is the power source of the entire engine, that is, the entire car. This is the heart of the car. Thick carbon deposits accumulated at the intake valve and other places, causing the valve seal is not strict, the intake is not sufficient, the exhaust is not complete, and the piston ring groove accumulation of oil slurry material, causing the cylinder seal is not good, cylinder pressure drop, deflagration value reduction, vehicle weakness, increased fuel consumption. Ultrasonic dynamic reduction, the use of ultrasound in the liquid to form cavitation bubbles when conducting, which in the moment of sudden closure, resulting in thousands of atmospheric shock waves, and shock vibration, can quickly remove dirt, sludge, carbon, and other pollutants, achieve amazing cleaning effect. After cleaning, the invisible metal part, and the bottom of the valve was cleaned, and the gentle accumulation of the fuel jet mouth hole is as bright as new.

Specification:

Operation steps of Ultrasonic Vein Deposition Carbon Cleaning Equipment

1. It is better to clean the hot car, remove the spark plug and check the carbon deposit on the top of the piston and the cylinder wall with the endoscope. If there are worn walls, you should explain the situation to the customer in advance.
2. Level the piston to the same level and funnel the cleaning solution into the cylinder. Each cylinder with a displacement of 1.6-2.0 is filled with about 200ml of cleaning agent. Each cylinder with a displacement of 2.0-3.0 is filled with about 230m of cleaning agent. Cleaning agent if there are special requirements according to the cleaning agent prompt requirements to operate.

3. Equipment connected to the air source, 220V power supply, the equipment can start working state. Insert the equipment cleaning rod into the cylinder. Adjust the height of the cleaning rod with the lifting rod. The optimal height of the cleaning rod head is 3 -5 mm from the top of the piston. The front end of the liquid submerged cleaning rod 5-6 cm is the optimal depth. Equipment factory cleaning time set to 10 minutes (Operation Panel"+""-" can adjust the time) . Then click the s key to start the operation.

4. Cleaning time, remove the cleaning rod and lifting rod, connect the air source, turn on the draw-back switch to drain the liquid in each cylinder, and then use the air gun with a cloth to dry each cylinder.

5. After cleaning, the engine oil must be replaced if the engine does not start.

Ultrasonic cleaning:

Cleaning problems such as jewelry, glasses, metal, etc., ordinary washing cannot penetrate into the gap. Ultrasonic technology is currently one of the more efficient cleaning methods, through the high-frequency vibration produces the "cavitation effect", which makes the stubborn stains free,

Realize a new look-a new cleaning effect.

Our advantages/Service

1. 14 years of focus on electronics manufacturing.

2. Verified by SGS / CE certification.

3. OEM/ODM services be provided.

4. Our unique advantage, give me an idea and return you a product.

5. Help customer analyze product project and provide solution.

Customer feedback:

FAQ

Could I Get one sample of the Ultrasonic Cleaner?
Yes, sample orders welcomed. Sample details please contact with saler.

2. Do you have your own factory?
Yes, we have OEM products and professional for plastic nealy 20 years.

3. Could I use my own logo or design on the Ultrasonic Cleaner?
Yes, Customized logo and design on mass production are available. And you can choose the colors or materials.