Crawler Type Super Sonic Cleaner For Metal Paers With 2.4KW Ultrasonic Power

Product Features:

1, cleaning process by touch screen + PLC programmable automatic control.

2. Air knife water cutting + hot air circulation drying device.

3, the whole machine is made of stainless steel, automatic transmission of stainless steel mesh belt, smooth operation.

4, the use of special mesh chain transmission transmission of workpiece, with ultrasonic rough cleaning, ultrasonic cleaning, bubble over water, cutting water, drying, and other functions of continuous cleaning and drying equipment.

5, high-speed fan to ensure that the drying box to fully use the heat, uniform temperature. This product support non-standard custom, can provide design drawings and cleaning program

This product support non-standard custom, can provide design drawings and cleaning program

Product details:

equipment mainly spray cycle filter system, spray system, wind cutting system, chain stepless speed control system and other functions, the whole cleaning process automatically completed, stable and reliable operation, to achieve the best spray cleaning effect.

Cleaning process: feeding → air cutting → spraying hydrocarbon cleaning 1→ air cutting → spraying hydrocarbon cleaning 2→ air cutting → spraying hydrocarbon cleaning → air cutting → spraying rust preventing oil → air cutting → hot air drying → cutting.

The transducer of the crawler type ultrasonic cleaning machine is fixed on the bottom plate of the cleaning tank, and a liquid is added into the tank. Will be washed down by the surface of the dirt, which is numerous small and dense bubble burst when the shock wave phenomenon. As a result, the machine immersed in the liquid under the object, with a strong penetration of solid and extraordinary cleaning, as long as the object in the liquid, both inside and outside the surface can be cleaned.

Cleaning Feedback:

Detail Information Of z-x 48:

Cleaning Effect:

Introduction Of Ultrasonic Cleaner Theory:

Cavitation is the key factor of ultrasonic cleaner theory. Cavitation is caused by fast crack of millions of bubble in a very short time. This process will be generated when ultrasonic wave(Vibration over 20KHz) came into cleaning liquid. When cavitation happen, it will generate strong pressure on the surface of cleaning parts which can take away the dirt in micro type.

FAQ:

1. What is Ultrasonics?

The science of ultrasonics is the study and application of mechanical vibrations above the range of human hearing—typically greater than 18,000 HZ.

2. What are the advantages of ultrasound over traditional cleaning methods?

minimize the use of manual labor

make cleaning and degreasing without the use of organic solvents

clean hard to reach areas of products and remove all types of dirt

shorten the processes such as extraction, dispersion, purification, chemical reactions

eliminates costly mechanical and chemical cleaning of heat exchangers

3. What cleaning solution should I use?

A large variety of different formulas designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to prevent unwanted reactions with the workpiece.

4. Can ultrasonic cleaning damage parts?

Ultrasonic cleaning is considered safe for most parts; although in some cases it is necessary to observe caution. Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe.