Super Sonic Cleaner With Rotary Drum For Small Parts Cleaning With 3600W Ultrasonic Power

Product Features:

1, rolling clean no dead angle, can make cleaning liquid and dirt contact more thoroughly, the water molecules in the rolling machine and the joint action of ultrasonic high-speed movement, on the surface of the impact of blasting stains, so that the cleaning effect is cleaner.

2, cycle filter high efficiency cleaning, using high density absorbent cotton filter core, filtering accuracy 10 microns, filter oil pollution magazine to avoid 2 pollution lead to repeated cleaning. 3,28kHz industrial cleaning, 28000 times per second low frequency vibration, high energy conversion rate; imported industrial vibrator, stable performance, strong power; multi-core vibrator synchronous work, cleaning effect beyond imagination.

4, heating drying efficiency doubled, after the workpiece is cleaned, put into the drying trough, heating pipe generated high temperature through the blower circulation blowing, so that the cleaning products quick dehydration drying, improve work efficiency.

5, remote control generator, power switch, time regulation, power regulation and other functions can be carried out on the portable generator remote control, more convenient to use.

6, the electronic control system, the operation button design more humanization, the operation is simple, at a glance.
This product support non-standard custom, can provide design drawings and cleaning program

Product detail:

The main body of the drum-type cleaning machine is the drum, its rotation can make the material inside the drum self-rolling mutual friction and friction with the wall of the drum, so that the surface of dirt stripping. But these functions are just mechanical aids in the cleaning operation.

Therefore, this kind of cleaning machine needs and drench water, spray water or soak to cooperate. There are two types of drum drive: one is in the outer wall of the drum at both ends equipped with a roller ring.

The drum (through the roller) is supported by a supporting wheel mounted on the rack at a fixed obliquity angle (3 °-5 °) and driven by a transmission device. The spray pipe can be installed above the inner side of the drum; the other is installed in the drum (fixed by the structure of the banner) axis, drive device to drive the Axis so as to drive the drum rotation.

In this type of ultrasonic cleaner, the spray hose can only be mounted on the outside of the drum. When the material is cleaned, the material enters the drum from the feeding hopper, rolls and rubs with the drum, and the water spray is used to wash the material, so that the dirt and silt on the surface of the material fall off, the screen mesh holes of the drum are discharged with the spray water through the drainage bucket.

Blue whale drum type ultrasonic cleaning machine, with ultrasonic, bubble, rotation, circulation, blowing, drying, automatic mechanical arm transfer functions, one-time feeding fully automatic cleaning and drying process. Good cleaning effect, high capacity and other advantages, suitable for all kinds of complex shape of small metal parts cleaning, specific can be customized according to customer requirements.

Application:

mainly used in machinery, electronics, jewelry, optics, medicine, painting, steam and vacuum coating pre-treatment and other related categories.

For the surface shape of complex parts, such as the parts above the groove, slit, blind hole, deep hole cleaning has an efficient and rapid cleaning role. At the same time, the utility model can clean the oil, rust and oxide on the surface of the parts, and realize one-stop processing of cleaning, spraying and drying.

Specification:

Application Brief:

How Do Ultrasonic Cleaners Work?

A simple way that ultrasonic cleaners work is likening them to an automatic dishwasher, but with some added refinements. An automatic dishwasher, much the same as an ultrasonic cleaner, combines water and a detergent to remove grease, grime and other contaminants from objects being cleaned.

Applications for ultrasonic cleaners include cleaning precision optics and laboratory glassware. Instead of cleaning pots and pans and bowls, ultrasonic cleaners most often are used to clean various other metal and plastic products difficult or impossible to clean by other methods.

Components of an Ultrasonic Cleaner

• Tanks to hold the cleaning solution. Tanks should be of stainless steel; their volume depends on the size of objects being cleaned

• Ultrasonic transducers that create the cavitation and that are bonded to the bottom of the tank

• A generator to power the transducers

• Controls that range from a simple on-off switch to sophisticated microprocessors that govern cleaning time, sweep, pulse, degassing, temperature, ultrasonic frequency , ultrasonic power, auto safety shutoffs and other refinements. More on these below.

What Do Ultrasonic Transducers Do?

There are two basic types of transducers; piezoelectric (a.k.a. electrostrictive) or magnetostrictive, but their function is the same. They are excited by electric current provided by the ultrasonic cleaner's generator to vibrate at ultrasonic frequencies that cause the bottom (and sides as the case can also be) of the tank to vibrate and thus serve as a membrane. This vibration forms the vacuum bubbles that implode, (not explode) on contact with items in the ultrasonic cleaner tank thereby blasting loose and carrying away contaminants. There are also immersible transducers. Ultrasonic frequency is an important part of how ultrasonic cleaners work and is discussed next.

How to Choose an Ultrasonic Cleaner Frequency

Ultrasonic is typically defined as sound above the human range of hearing. Low frequencies such as 25,000 cycles per second or 25 kHz produce relatively large bubbles that implode more violently than those created at higher frequencies such as 37, 80 or 130 kHz that produce progressively gentle cleaning action. As an example, the radius of a cavitation bubble produced at 37 kHz is approximately 88 microns. At 80 kHz it is 41 microns.

As a bit of digression, the implosion of cavitation bubbles produce shock waves radiating from the site of the collapse and create temperatures in excess of 10,000°F and pressures in excess of 10,000 psi at the implosion site. Yet the process is so fast that there is little heat buildup and no damage to parts being cleaned. That said, one should never reach into an operating ultrasonic cleaner to check, reposition or remove parts for examination.

Removing gross contaminants from robust parts such as fabricated or cast metals requires lower frequency cleaners. Softer metals, plastics, and products with polished surfaces should be cleaned at higher frequencies. In addition to protecting polished surfaces smaller bubbles are better able to penetrate tight areas such as seams, crevices and blind holes. If you'd like more information on this particular topic check this article on selecting ultrasonic cleaner frequencies.

Our point is that purchasing decisions for an ultrasonic cleaner should be made on more than price.

Discount Policy:

If you are the first customer of Whale Cleen sonic, you will get US$50 coupon when your purcahse amount over US$500.More discount information,please contact our sales man for more detail.