Large 310L Heated Soak Tank SUS304 With Constant Working Heater

Why You Need Whale Cleensonic Soak Tank?

It is always not a easy job when you doing cleaning job in kitchen because it is always full of carbon and grease which is extremeyl hard to clean.This is why Whale Cleen sonic design and produce heated soak tank for commerical kitchen. We believe we not only can solve the cleaning problems but also help you improve your food quality and customer service with this product.

Heated soak tanks are built to sit under the three-compartment sink. What is removed in the cleaning process either floats on the surface or drops down as heavier sludge. There are perforations in the lifting basket—the tank within the tank—that allow the sludge to fall to the bottom of the tank. At the end of each month, the heat is turned off, the tank is drained using the floor drain, and the debris is removed.

Soak tanks were originally designed for the cleaning of hood filters that collect FOG. The baffles within the filters trap the FOG. It is imperative for the FOG to be removed regularly in order to prevent hood fires.

Cleaning Steps Of Whale Cleen sonic Soak Tank:

Step 1: Pre rinse

Excess debris from item to be soaked.

Step 2: Loading

Fill clean hot water to Max Line of soak tank.

Step 3: Soaking

Put some suitable cleaning powder in the soak tank and let it soak whole night.

Step 4: Removing Contaminant

Using high pressure water or other tool to remove all the contaminat on the surfacte of equippment.

Step 5: Drain the dirty water

Usually it can be used for monthly when you fill full tank of water and cleaning powder. You don't need to drain the water unless it is too dirty to cleaning.

When you need to drain the water, please disconnect the power plug at first and better cool the water as well. Connect the extra outlet vavle to the sewer.

Make sure the vavle is connected well before you open the drain vale on the soak tank.

Remember to clean the basket and soak tank before you use it again.

Specification Of LanJ-310:

Customer's Feedback:

The Detail Of WHALE CLEEN sonic Soak Tank:.

1. The tank is filled with water, and the CarbSolve chemical is added. Once dissolved and heated, it’s ready to use. It will clean continuously, remove fat, grease, oil and carbon build up for up to 30 days.

2. The liquid solution is maintained at a constant temperature of 180°F resulting in all equipment being sanitised and coming out bacteria free.

3. Items are loaded into the unit and left to soak for varying lengths of time. The time in the Spectank will be determined by the amount of carbon build up.

4. The unique Carbsolve cleaning powder dissolves the proteins in the plant and animal fats causing them to separate from the items being cleaned.

5. The lifting basket is used to immerse items into the unit, and to remove items once cleaned. A light rinse is required before using the items.