10L Mechanical Ultrasonic Cleaner SUS304 Tank With Heater For Carburetor

How Whale Cleen sonic Mechanical Ultrasonic Cleaner Works?

Whale Cleen sonic supplies ultrasonic cleaning equipment in both standard units for small scale operations and custom configured large scale units for inline operations and stand alone high volume production.
Ultrasonic cleaning is a process that uses ultrasound (usually from 20–400 kHz) and an appropriate cleaning solvent to clean items from any oils, greases and other manufacturing residue. The ultrasound is used with an appropriate solvent for the item to be cleaned and the type of soiling present. Cleaning normally lasts between three and six minutes, but can also exceed 20 minutes, depending on the object to be cleaned.

Specification Of z-04:

Specification Of Related Model:

If this model is not suitable for you, please check other in below chart.

Customer's Cleaning Feedback:

FAQ:

1. Can ultrasonic cleaning damage parts?

Ultrasonic cleaning is considered safe for most parts; although in some cases it is necessary to observe caution. Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe.

2. What cleaning solution should I use?

A large variety of different formulas designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to prevent unwanted reactions with the workpiece.

3. What frequency is better for my parts?

Frequency is suggested based on pollutants in the objects.

28kHz frequency is stronger, better for car/motor/truck/vessel parts clean(oils, grease,rust,pastes, etc. )

40kHz is better for pcb boards, electronic parts, etc.

Higher precision goods, higher frequency.