PCE can be widely used in ordinary concrete and high performance concrete
Polycarboxylic acid superplasticizer is the third generation of new superplasticizer for concrete. Compared with naphthalene superplasticizer, polycarboxylic acid superplasticizer has the advantages of high water reduction rate, high strength, low shrinkage, low secretion and low slump loss. Polycarboxylate superplasticizer has relatively good adaptability with different cement. Compared with naphthalene superplasticizer, the strength of polycarboxylate superplasticizer concrete increases faster in early and late periods, especially the strength of high-strength concrete increases more obviously in late periods.
PCE offers the following benefits for the precast concrete industry:
-Extremely high-water reduction
-High early strength development
-Shorter demoulding time
-Energy-saving (reduced steam curing)
-Produce Rheoplastic and Rheodynamic concrete having a low water to cement ratio
-Optimize the curing cycles by reducing curing times or temperatures
-Eliminate heat curing
-Eliminate the energy required for placing, compaction and curing
-Increase productivity
-Improve surface appearance
-Produce durable precast concrete elements as per EN 206-1
As compared with the traditional superplasticizers, the engineering properties such as early and ultimate compressive and flexural strengths, bond to steel, modulus of elasticity, shrinkage, creep, and impermeability are greatly improved.
1) PCE can be widely used in ordinary concrete and high-performance concrete, especially having excellent performance in high-performance concrete of early strength.
2) PCE can be applied to industrial and civil construction, pumping concrete construction in hydraulic projects, ports, traffic, municipal and railways. It can also be used for making special concrete, such as high strength, ultra-high strength, high impermeability, early strength, self-leveling and steel fiber types.
Product name | Mother liquor of Polycarboxylate Superplasticizer | ||||
Product number | KH-401 | Delivery date | May 5, 2023 | ||
Test items | Control standard | Test results | |||
Water reduction rate(%) | ≥25 | 36 | |||
Bleeding rate(%) | ≤60 | 0 | |||
Air content(%) | ≤6.0 | 1.5 | |||
Difference in setting time(Min) | Initial setting | Final set | Initial setting | Final set | |
-90—+120 | -90—+120 | +15 | +10 | ||
Compressive strength ratio(%) | 3d | ≥160 | 165 | ||
7d | ≥150 | 160 | |||
28d | ≥140 | 145 | |||
28d Shrinkage ratio (%) | ≤110 | 85 | |||
Rebar corrosion | Whether there is rust damage | NO | |||
Pure pulp fluidity (mm) | ≥220 | 280 | |||
proportion (g/cm3) | 1.03—1.20 | 1.08 | |||
pH值 | 6—8 | 6.9 | |||
Solid content | 50% | 49.8 |
Packaging and storage :
Packing: 200kg/BBL, 1ton/BBL or according to customer's request.
Storage:
This product should be stored in a special warehouse or fixed place, under the condition of 0~35℃, original seal and avoid direct sunlight, shelf life is 12 months.
1,this product is a weak alkaline liquid, non-toxic, non-corrosive, environmentally friendly product. It is not edible and when exposed to the human body and eyes, should be washed with water as soon as possible, causing allergic to some of the human body should seek timely medical treatment.
2,this product should be stored in a covered container to avoid exposure to moisture/water and debris, mixed with or evaporation of water dry.