Cansec Wireless S2SPI-HA-A ST SPIRIT1 QTR 434M/470M/868M/915M smart home IoT Solution Low Power Consumption Sub-G module
S2SPI-UA-A Sub GHz module with ST Spirit-2 chipset
Parameter | Min | Typ | Max | Unit | |
Operating Voltage | 1.8 | - | 3.6 | V | |
Operating Temperature | -20 | - | +70 | ℃ | |
Current Consumption | Sleep Mode | - | - | 1 | uA |
Receive mode | - | 8 | 9 | mA | |
Transmit Mode | - | 38 | 40 | mA | |
TX Power (For Carrier) | - | - | 14 | dBm | |
RX Sensitivity (For Lora Modulation) | - | - | -130 | dBm | |
Distance | HA:110 UA:230 | m |
Parameter | Min | Typ | Max | Unit | |
Operating Voltage | 1.8 | - | 3.6 | V | |
Operating Temperature | -20 | - | +70 | ℃ | |
Current Consumption | Sleep Mode | - | - | 1 | uA |
Receive mode | - | 8.2 | 9 | mA | |
Transmit Mode | - | 21 | 24 | mA | |
TX Power (For Carrier) | - | - | 14 | dBm | |
RX Sensitivity (For Lora Modulation) | - | - | -130 | dBm | |
Distance | HA:110 UA:230 | m |
S2SPI-UA-A Sub GHz module with ST Spirit-2 chipset
Pad Number | Name | Pin Type | Description |
1 | SDO | Digital out | SPI slave data output |
2 | SDI | Digital in | SPI slave data input |
3 | SCLK | Digital in | SPI slave clock input |
4 | CSn | Digital in | SPI chip select |
5 | GPIO0 | Digital I/O | General purpose I/O that may be configured through the SPI registers to perform various functions |
6 | GPIO1 | Digital I/O | General purpose I/O that may be configured through the SPI registers to perform various functions |
7 | GPIO2 | Digital I/O | General purpose I/O that may be configured through the SPI registers to perform various functions |
8 | GPIO3 | Digital I/O | General purpose I/O that may be configured through the SPI registers to perform various functions |
9 | GND | Ground pin | Connect to GND |
10 | SDN | Digital in | Shutdown input pin. SDN should be = ‘0’ in all modes, but SHUTDOWN mode |
11 | GND | Ground pin | Connect to GND |
12 | GND | Ground pin | Connect to GND |
13 | VCC | Power Supply | 1.8 V to 3.6 V power |
14 | VCC | Power Supply | 1.8 V to 3.6 V power |
15 | GND | Ground pin | Connect to GND |
16 | GND | Ground pin | Connect to GND |
17 | GND | Ground pin | Connect to GND |
18 | GND | Ground pin | Connect to GND |
19 | GND | Ground pin | Connect to GND |
20 | ANT | Antenna Interface | Connect to an external Antenna |
21 | GND | Ground pin | Connect to GND |