Electric Wire Rope Pulling Winch Lebus Grooved Drums Winch For Terminal Equipment

Product introduce

Maintenance and maintenance of electric winch

1. All power supply must be completely cut off before maintenance of the winch begins. There should be no load in the system.

2. Before maintenance is permitted, users are advised to operate under the work permit system to ensure that all explosion hazards have been assessed by qualified persons.

3. Check the painting condition of the winch every month, and paint it to ensure that the metal is not exposed or corroded.

4. Make sure all shields are in place.

5. Check the operation of all safety devices, including the emergency stop system.

6. Check all electrical junction boxes to prevent loose connectors and water or condensate from entering.

7. Make sure all bolts and screw connections are secure.

Installation of electric winch

The most important note here is the state of the rope drum, which must be used to ensure that the lasso is evenly wound before the process begins. The installation process is as follows:

1. Plug in the remote control. Connect the distal end of the first plug-in winch.

2. Do not let the remote connection hang. If you are a driver, operate the remote control from the driver's seat and then make additional connections around the side mirrors of the car to make co-working easier.

3. Open the noose, use the remote control to open the noose a bit, and install it on the side of the electric winch.

Turn on the clutch. Please note that we have to open the hook later to open the clutch.

5. Hold the rope hook hand. Grabbing the hook with one hand pulls the rope out of the roller, so no matter how long the rope has been twisted, it doesn't reach the hook.

6. Pull the rope on the pivot and lock the clutch.

So the electric winch is installed.

Precautions for controlling electric winch

In practice, auxiliary tools such as gloves to keep hands safe are essential for safety and stability when using electric winches. Also, if you want to attach the electric winch to a tree and to a rope, hang the U-ear and tight wire pulley. Tape is used to hold the pivot. The ideal length is 1.5-2m. U-lug and belt and electric winch hook can be connected. It is therefore best to prepare lugs of several sizes. With two or three rows, drag to change direction, you need a tight pulley

Application:

The Electric Power Winch of this series are used to lift materials, equipments and people in coal mine, iron mine, metal mine and non metal mine inclined roadway and small shaft.

Working Principle:

The motor transmits power to the winding drum wrapped by wire rope through the reducer to lift and lower the container, reduce the speed through electric drive. Disk break is controlled by hydraulic pressure and electric; Position indicator system shows the depth of the container; the control system integrating the motor, electric and hydraulic pressure supervises and protects the whole equipment through a variety of sensors and control elements; Internal and external information transmission is carried out by the computer and the internet technology.