Title:Drum-Shaped Wire Rope Reel mounted on Crane and Lifting Equipment
Breif introduction:
LBS is different from spiral grooving. Its design make up for the weekness of spiral grooving like:
- LBS rope groove productioned by our company has obvious advantages in the spooling of multi layer steel wire rope compared with ordinary cordless groove (smooth) drum and helical rope groove drum.
- the LBS groove solves the serious problem of rope biting and disorder in the spooling process of the steel wire rope.
- LBS rope groove to make the rope more smooth spooling, the load between the layers evenly distributed, reducing the wire rope in the process of irregular, random and bite rope phenomenon, reducing the damage to the rope, extending the wire rope Life, improve the safety of equipment operation, and reduce the mechanical equipment downtime due to rope change.
LBS grooving structure:
- This LBS rope groove can be directly on the smooth drum processing.
- It can also be made with a LBS rope groove of the sleeve, the sleeve from the middle position separated into the upper and lower split, the installation of the sleeves wrapped around the smooth drum, by bolts or welding with the reel Tightly connected into one.
- Compact structure and reasonable design
- Safe and reliable function
- Highly efficient, constant operating torque motor.
- Smooth running over the entire speed range.
If you want to reduce the cost, you can choose the LBS sleeve which is designed by your drum's structure. And it also can meet your requirements.
And if you want to instead of a new drum,we can process your required groove, but you need to provide the parameter as follows:
1 | what is the drum diameter ? |
2 | what is the width between the flanges? |
3 | what is the wire rope structure? rope length and roep diameter |
4 | rotation direction is right or left ? |
5 | groove type is spiral groove or LBS ? |
