Title:Spiral grooved Winch Drum with Diameter of 570mm and 505mm Long

Product structure:

Technical Parameters: (All of the parameter should be according to each product)

Processing equipment: CNC machining center

Rotation Direction: Left or Right

Wire Rope Diameter: 3 MM~190 MM

Product condition:New to order

About LBS grooved drum:

1.Integral rope groove drum: rope drums with grooves cut directly into them (with or without bolted or welded flanges, as required).

2.The drum and flanges are connected by welding.

3.According to customers’ requirements, the flanges are either welded or screw-bolted.

4.Groove geometry is determined by rope construction, diameter and length, and by application. the drum has the required mounting dimensions for the actual operating conditions.

The relevant product ------LBS grooved sleeves

• the split-type LBS groove generally can be mounted on a smooth, grooveless drum-for for retrofit or where the drum needs to be replaced.
• The split -type sleeve system consists of a pair of outer casings that are bolted or assembled on a smooth light cylinder, so that the outer surface of the cylinder becomes a grooved form, and the split sleeve is composed of a spiral groove and a parallel groove, and the groove is formed. The design conforms to the specific rope structure, diameter and length.

Product detailed parameters:

1. Drum diameter

2. Width between flanges

3. Rope or cable diameter

4. Drum construction

5. Length of rope or cable to be accommodated

6. Distance to fixed sheave and position between flanges

7. Direction of wire rope entry

8. Outside diameter of flanges

9. Maximum operating load on rope or cable

10. A detailed drawing of the drum if possible

11. Type of rope entry through flange or through barrel

12. Radius barrel to flange

13. Any further information

FAQ: