Accuracy 15PPM Oil Content Meter Marine Auxiliary Water Detector Alarm
Description:
Measure range:0-30ppm
Alarm Point:1-15 ppm adjustable
Accuracy: Better than 5mg/l
Power Supply:220VAC/110VAC ± 10%
Display:LCD display
Size (over all):360 mm W x 240 mm H x 105 mm D
Standard:IMO.Res.MEPC.107(49)
Specifications:
The 15PPM Oil Content Meter/Marine 15ppm Bilge Water Alarm device has been designed specifically for use in continuous monitoring of
oil in bilge water, 15 ppm alarm and control of discharge, detection, memory and enquiry of alarm status. It is applicable to detect boiler condensate water. And it applies to oil and chemical industries as well.The bilge water alarm device use the technology of near infrared measurement, which can
display the detected result in real time. The unit is supplied with 2 worksadjusted alarms. The
set point (15ppm factory set) could be adjusted at any moment through the panel. If an alarm set
point is exceed, the alarms are visible at the front panel and the appropriate relays are switched,
that can be achieved the movement control of overrun closedown or the treatment of overrun
recycle, and the memory and enquiry of alarm record. Furthermore, a 4 - 20 mA (equal to 0 – 15ppm) effective signal output is available for driving a recorder or external meter.
Technique Parameter:
Type: | OCM-15 |
Range: | 0 – 30 mg/l can exceed to 50mg/l |
Accuracy | Better than 5mg/l |
Linearity | better than 2 % |
Display | LCD display |
Power Supply: | 220VAC/110VAC ± 10% |
Consumption: | 10 VA |
Alarm Points: | 1-15ppm |
Alarm Points works set: | 15ppm |
Alarm 1 delay | 0-10 second. |
Alarm 2 delay | 0-10 second |
Alarm output | Two way relays output |