The number of running data sampling points for the scan configuration
1,Product introduction
Install the ground feet in the threaded holes on the four corners of the bottom of the radar, and adjust the height of the ground feet to achieve the leveling of the radar. The leveling degree of the radar is observed through the horizontal liquid bubble.
2,Performance parameters
Basic parameters | |
Line-of-sight detection distance | 10km (typical case) |
Distance resolution | 30m/45m/60m/75m optional |
Accumulation time | 0.5s/1s/2s/4s/8s optional |
Radial wind speed measurement range | -75~+75 m/s |
Radial wind speed measurement accuracy | 0.1m/s |
Number of distance layers | up to 300 |
Horizontal scan range | 360° × n |
Vertical scan range | -10°~190° |
Pointing accuracy | 0.1° |
Scanning method | PPI , RHI , DBS , LOS and Program Scan |
Real-time data output form | Profibus DP/Modbus TCP/CAN optional |
Telecommunication | 1000BASE-TX or 4G remote access |
Environmental parameters | |
Operating temperature and humidity | -25~+50℃ (extendable to -40~+60℃), 5%~100% RH |
IP protection class | Housing IP54, core module IP66 |
Anticorrosion grade | C4 |
Survival wind speed | 70m/s (fixed by foot or by wire rope) |
Working altitude | ≤3500m |
Other parameters | |
Running power consumption | ≤1kW |
Powered by | 110VAC±20% or 220VAC±20%, 50Hz±10% |
Size | 800mm*650mm*11 30mm |
Weight | ≤150kg |
Accessibility | |
GNSS functionality | Support GPS/Beidou |
Time service | NTP timing or GPS/Beidou timing |
3,Schematic diagram of 3D scanning Doppler wind Lidar