CE Certified 2kw 5kw H Type Small Vertical Wind Turbine IP54 Protection With Low Noise

H Vertical Axis Wind Turbine Generator is a major type of vertical wind power generator products,for the H series,the output capacity covering 1kw-30kw,with voltage range of 12V/24V/48V/96V/120V/220V/380V.The default model has 3 blades which are made up of Aluminum Alloy,however,apart from the default blade options.Jiangsu Shenghuang is able to customize the blade quantity as per client's need.In addition,it adopts three-phase Coreless Permanent Magnet Syncronous Generator,which comes with low starting torgue.

A vertical axis wind turbine (VAWT) is a wind turbine with the main rotor axis running vertically. VAWT does not need to be pointed towards the wind.Vertical axis windmill/turbine, 300W to 30kW vertical magnetic windmill with permanent magnet generator PMG and grid-tied wind inverter.

Wind power generation means that the wind wheel rotates under the action of wind, and then the mechanical energy is converted into electrical energy through the generator, which is stored by the battery and transmitted over long distances through wires. At present, the most widely used type of wind turbine in the world is the horizontal axis high-speed propeller wind turbine, which is mainly composed of a wind wheel, a transmission system, a generator and a steering device.

Feature

1. Low Start-up Wind Speed
2. Three Blades
3. One year Warranty
4. Flange Connection with easy installation
5. Certified with:CE, RoHS and ISO 9001 2000
6. High-efficiency coreless disc generator

Application

1. Marine,&Boat

2. Streetlights

3. Home, Openning Plaza lighting.

4. Wind&Solar Hybrid System

5. Monitoring device

6. Factory

FAQ

Q1. What is the best material for wind turbine blades?
A: Most blades are made of glass fiber reinforced polyester or epoxy resin. Carbon fiber or Kevlar is also used as reinforcement. Nowadays, the possible use of wood compounds, such as wood epoxy or wood fiber epoxy, is being studied.

Q2. How many blades are best for a wind turbine?

Generally, most horizontal axis wind turbines have three blades. The decision to design a three blade turbine was a compromise. Due to its reduced resistance, the single blade design is the best number to achieve maximum efficiency,hwever,one-blade design makes the whole set of wind turbine generator not stable.

Q3. How can you increase the efficiency of a wind turbine?
--A:Doubling the diameter of turbine blades will increase the available power of wind energy by four times. Therefore, if the wind speed is low, larger diameter turbine blades are needed to obtain the maximum wind power efficiency.

Q&A

Q1: What is H Type Vertical Wind Power Generator?

A1: Therefore, the Vertical turbine that has straight blades is called H-type vertical wind turbine. The H-type wind turbine has straight and vertical blades instead of standard shapes that have curved blades.

Q2: Are vertical axis wind turbines better?

A2: While they produce less energy than horizontal turbines, vertical axis wind turbines still produce power and can be a better option depending on the application. They're more suitable where space is limited and come with fewer challenges and risks to maintain,or the noise-control requirement is very stricted on installation site.