Best Automatic Steel Wire Electric Welded Wire Mesh Machine Factory Supplier

Welded wire mesh machine both cross wire and line wire feeding automatically,

The machine automatically stops after reaching the set length.

The use of fractional welding reduces the load on the power supply and achieves energy saving and high efficiency.

can change at your will.

Mesh width:1m, 1.2m, 1.5m, 2m, and 2.5m
Minimum mesh opening size:12.5mm, 25mm, 50mm

Warmly tips: we can design the machine according to your wire diameter, mesh hole size and mesh width.

Best Automatic Steel Wire Electric Welded Wire Mesh Machine Factory Supplier

1. The machine is fully automatic wire feeding, weft wire automatic feeding

2. Automatic rolling, automatically stop after reaching the set length

3. Different welding, reducing the load of the power supply, energy saving and efficient

Best Automatic Steel Wire Electric Welded Wire Mesh Machine Factory Supplier

1. The raw material is suitable for low-carbon steel wire (black wire) and galvanized wire.

2. Both of the longitude wire and cross wire are fed from wire coils automatically.

3. The middle cutter and sider cutters can be adjusted randomly to make two mesh rolls at the same time.

4. The mesh roll length can be set by a counter switch on the control panel.

Best Automatic Steel Wire Electric Welded Wire Mesh Machine Factory Supplier

Best Automatic Steel Wire Electric Welded Wire Mesh Machine Factory Supplier

The hopper will be running and takes the wire to the positioning device and positioning frame angle place.

The upper electrodes press to bottom electrodes , the warp wire and weft wire are welded together.

When the upper electrodes raise, stepping mechanism (gear shaft) pull mesh to be the next welded

position according to pre-set size. Running back and forth, mesh winding mechanism pull mesh to

reel shaft at the same time. It can set the length according to the request of the mesh and

shutdown automatically to be pre-set length.

After sales service

1. Test the machine before shipment

2. Guarantee time: one year since machine was at buyer's factory but within 18 months against B/L date

3. Within guarantee time, if any components are broken under normal condition, we can change for free

4. We can send our best technician to buyer’s factory for installation, debugging and training

5. Buyer need to undertake double-way air tickets, Visa, Worker salary USD120.0/ Day, Accommodations

FAQ

Q: What's the machine price

A: We need to know your wanted wire diameter, mesh hole size and mesh width

Q: What's the production capacity

A: If cross wire space is 1/2", one hour can weld about 90m length.

If cross wire space is 1", one hour can weld about 180m length

Q: Can you make voltage according to my requirement

A: yes, we can make 3 phase, 380V/220V/415V/440V, 50Hz or 60Hz etc