2500mm Width Mesh Size 50x200mm Automatic CNC Wire Mesh Welding Machine

1.This machine adopts synchronous control technique. The center-control and welding time are composed of Panasonic PLC program system. The input front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable.

2. The cross wire system is controlled by stepping motor. The falling cross wire is automatically one by one. Increasing productivity.The machine stops automatically if cross wires are used up in the hopper.

3.Adjustable longitude wire space and weft wire space according to your required mesh size.. The greatest advantage is that you can adjust the space of longitude wire space and weft wire space at random on the same one piece mesh panel.

4.Mesh pulling system is controlled by servo-motor (Panasonic brand) that adopts elastic

tension and opening positioning mesh, which improves the precision of mesh opening size.

5.Welding transformer: 160KVA*6PCS(48 welding spots.) every 8 welding spots need one water cooling transformer.

6.Wire feeding way:The line wires and cross wires should be pre-straightened and pre-cut, then be put by manual work.

2500mm Width Mesh Size 50x200mm Automatic CNC Wire Mesh Welding Machine​ :

Full automatic panel welding machine ,line wire is feeding by coil wire ,cross wire need pre-straightening and cutting. Semi automatic panel fence welding machine,line wire and cross wire both need pre-straightening and cutting.

2500mm Width Mesh Size 50x200mm Automatic CNC Wire Mesh Welding Machine:

Reinforcing mesh welding machine, fence mesh welding machine, animal cage welding machine, steel grating welding machine, electric welded wire mesh machine.

2500mm Width Mesh Size 50x200mm Automatic CNC Wire Mesh Welding Machine Speciifcation parameters:

2500mm Width Mesh Size 50x200mm Automatic CNC Wire Mesh Welding Machine​:

1. It is strictly forbidden to use any part of the body or any object close to the touch transmission gear, transmission sheave belt, sprocket, straightening machine, chain, induction body, proximity switch, and electric conductor, transformer and other conductor parts with dangerous voltage. .

2. Do not place the handle or object near the upper electrode that is being pressurized or placed between the upper and lower electrodes.

3. When there is a fuse in the electric control cabinet, the power should be stopped first, and the electrician should find out the cause of the fuse, and then replace it with the fuse of the same type and specification, otherwise it will cause fire and burn the device.