Continous Best Use Straight Line Wire Drawing Machine

Straight Line Wire Drawing Machine Introduction:

Straight wire drawing machine is one of the common metal wire processing equipment. Straight wire drawing machine can stretch high, medium and low carbon steel wire, stainless steel wire, copper wire, alloy copper wire, aluminum alloy wire, etc. Line processing. Accurate meter counting with error of 0.1%; fixed-length automatic deceleration and parking; disconnection detection and automatic parking; forward and reverse jog and left-right linkage of any reel; various fault information and processing information display; various motion information monitoring. And support any mold matching process, after the mold is worn, it is automatically compensated by tuning, and it is not easy to break the wire. And there is a jumper device that can cut off the reel and pull it arbitrarily to adapt to different processes.

Straight Line Wire Drawing Machine Advantage:

Straight Line Wire Drawing Machine Parameters and characteristics:

Straight Line Wire Drawing Machine Work Process:

Steel in coil →Pull up wire rack→Derusting machine→bepowder→Straight Line Wire Drawing Machine→Automatic take-up

Straight Line Wire Drawing Machine Attention In Work:

Equipment should be inspected monthly (closed for 4 hours) for thorough maintenance and overhaul.

daily maintenance:

1) Keep the outside of the equipment clean and check that the air supply lines and quick connectors are good.

2) Lubrication of the upper and lower bearing housings and the lifting screw (oil gun refueling).

3) Check the belt and its tension (if the tension is too loose, adjust to the appropriate level).

4) Check the belt and its tension (if the tension is too loose, adjust to the appropriate level).