Automatic Straight Line Wire Drawing Machine Production Line

Straight Line Wire Drawing Machine Introduction:

Straight wire drawing machine is one of the common metal wire processing equipment. Straight wire drawing machine can stretch high, medium and low carbon steel wire, stainless steel wire, copper wire, alloy copper wire, aluminum alloy wire, etc. Line processing. Accurate meter counting with error of 0.1%; fixed-length automatic deceleration and parking; disconnection detection and automatic parking; forward and reverse jog and left-right linkage of any reel; various fault information and processing information display; various motion information monitoring. And support any mold matching process, after the mold is worn, it is automatically compensated by tuning, and it is not easy to break the wire.

Straight Line Wire Drawing Machine Parameters and characteristics:

Straight line wire drawing machine suitable drawing materail:

Welding rod; welding wire (gas shielded welding wire, submerged arc welding wire, flux cored wire, etc.); steel wire (high, medium and low carbon steel wire, stainless steel wire, prestressed steel wire, tire wire, hose wire, spring wire, steel cord, etc.); Electric wire viewing (aluminum clad steel wire, copper wire, aluminum wire, etc.); various metal wires such as alloy wire.

Straight Line Wire Drawing Machine Advantage:

1,The straight wire drawing machine is famous for its high efficiency and low cost. When it is applied,

it will bring huge cost-reduction as a result of its low power consumption, high percent of pass and yield rate.

2,Error 0.1% accurate meter; fixed length automatic deceleration and parking; disconnection detection and automatic stop; any reel positive and negative jog and left and right linkage;

3,various fault information and processing information display; various motion information monitoring.

4,The mold-matching process, after the mold is worn, is automatically compensated by tuning, and it is not easy to break the wire.

5,Wire drawing: different metal wires, different final product accuracy and requirements, the wire drawing technology is very different, the wire drawing part is controlled by a main motor (called the host),

6,the metal wire is leaded by the internal drums, and passes through the mold Gradually stretch to achieve the required wire diameter.

7,At the same time, when drawing, the cooling water or cooling fan is turned on to cool the mold.

Straight Line Wire Drawing Machine Work Process:

Steel in coil →Pull up wire rack→Derusting machine→bepowder→Straight Line Wire Drawing Machine→Automatic take-up