Full AutomaticGalvanized Wire Welded Roll Mesh Welding Machine

Full automatic welded wire mesh machine in roll: the horizontal wire and vertical wire feeding automaticly,mesh coiling automaticly,the machine will stop automaticly when it reaches the setting length.It adpots separate times welding,reduced the load of the power source,making energy efficient.

Machine details:

Technology:

The warp wires are through screw, into the sparse board and are fixed in the bottom of electrodes. The weft wires is fed from auxiliary engine ,then straightening into the hopper, when wires are reaching pre-set length , they are been cut off automatically

Roll fence mesh welded wire emsh machine advantage :

Full automation, welding speed (90 or even 120 times per minute) is almost twice the industry, simple operation, good after-sales service and so on.

FAQ:

Q: What's the machine price?

A: We need to know your wanted wire diameter, mesh hole size and mesh width.

Q: What's the production capacity?

A: If cross wire space is 1/2", one hour can weld about 90m length. If cross wire space is 1", one hour can weld about 180m length.

Q: Can you make voltage according to my requirement?

A: yes, we can make 3 phase, 380V/220V/415V/440V, 50Hz or 60Hz etc.

Q: What's the payment terms?

A: 30% T/T in advance, 70% T/T before shipment, or 100% irrevocable L/C at sight, or cash etc. It is negotiationable.

Work theory:

The hopper will be running and takes the wire to the positioning device and positioning frame angle place. The upper electrodes press to bottom electrodes , the warp wire and weft wire are welded together. When the upper electrodes raise, stepping mechanism (gear shaft) pull mesh to be the next welded position according to pre-set size . Running back and forth, mesh winding mechanism pull mesh to reel shaft at the same time. It can set the length according to the request of the mesh and shutdown automatically to be pre-set length.

Advantage:

Full automation, welding speed (90 or even 120 times per minute) is almost twice the industry, simple operation, good after-sales service and so on.

Company introduction:

Hebei OLT wire mesh machine company with 55 employees,9000 square meters workshop,more than 30 yesrs experience in metal wire mesh fence.All these help us to be the leading manufacture in Metla wire Mesh and wire mesh mahcinery fied,Dealers from all over country are welcome to visit and purchase .