Min 100mm hole size panel fence welded wire mesh machine with 2.5m width

Welded wire mesh machine information:

The machine adopts synchronous control technique, both welding time and cent-control welding is composed of PLC program system. The input front-panel has two forms, touch screen and keyboard, it makes the machine more intelligent and reasonable.

Welded wire mesh machine characteristics :

Full automatic panel welding machine ,line wire is feeding by coil wire ,cross wire need pre-straightening and cutting. Semi automatic panel fence welding machine,line wire and cross wire both need pre-straightening and cutting.

Welded wire mesh machine technology :

The construction mesh welding machine increases the electrode pressure, increases the welding current or prolongs the welding time to compensate for the effect of the resistance reduction, and can maintain the strength constant. The welding condition is used to improve the stability of the welded joint strength. The same electrode pressure is too small. It will cause splashing and reduce the welding strength. Electrode material and pressure factors have certain influence on the welding effect. Choosing a suitable welding arrangement can improve the actual production efficiency of the welding equipment.

Welded wire mesh machine usage :

The construction mesh welding net machine has a wide range of welding applications and has been widely used in industrial and civil building floors. The cover of the room. On the wall. bridge. Concrete pavement. This platform. airport. Cement pipe. Specific roughing. Retaining walls, protection of hillsides, tunnels, piers, embankments, etc.

Specification parameters:

Welded wire mesh machine advantage:

Controlled by computer, the welding current and welding time in each welding transformer can be individually adjusted. The machine operator interface with color touch screen and control buttons, easy to operate.Host framework structure, stable performance, the welding pressure is continuously adjustable, solid and perfect welding spot.Integrated deceleration electromagnetic brake motors for power, inverter control, adjustable speed.

welded wire mesh machine notes:

It is strictly forbidden to use any part of the body or any object close to the touch transmission gear, transmission sheave belt, sprocket, straightening machine, chain, induction body, proximity switch, and electric conductor, transformer and other conductor parts with dangerous voltage. .

2. Do not place the handle or object near the upper electrode that is being pressurized or placed between the upper and lower electrodes.

3. When there is a fuse in the electric control cabinet, the power should be stopped first, and the electrician should find out the cause of the fuse, and then replace it with the fuse of the same type and specification, otherwise it will cause fire and burn the device.

4. It is forbidden to dismantle and break the zero (grounding) safety protection line on the main machine and the electric control cabinet, and check whether the zero (grounding) safety protection line is good.

5, the operator should always pay attention to see, listen, smell, early detection of accidents and equipment hidden dangers, when an abnormal phenomenon is found, should immediately stop power failure for inspection.

Company information:

Hebei OLT wire mesh machine company with 55 employees,9000 square meters workshop,more than 30 yesrs experience in metal wire mesh fence.All these help us to be the leading manufacture in Metla wire Mesh and wire mesh mahcinery fied,Dealers from all over country are welcome to visit and purchase .