PTFE Fiberglass Mesh Conveyor Belts 4*4 Mm Hole Pet Food Drying Use

Description of PTFE conveyor belt :

PTFE conveyor belts are widely used in textile printing and dyeing , offset printing machines , bonding machines , garment printing and dying . And drying of water-containing articles , such as corrosion resistance , high temperature resistance and good insulation . Today's theme is a brief introduction to the way teflen conveyor belts are joined . teflen mesh conveyor belt is a joint type mainly has a soft joint and a steel joint , and the soft joint is commonly called a cow nose joint . Regardless of the type of joint and the joint process . The service life of the teflen conveyor belt is very important , which is not only affected by the material of the conveyor belt itself . Today , the soft joint method steps are briefly explained . When making the soft joint , first connect the two joints and insert the teflen bolt into the Kevlar ring; then spread the high temperature cloth on one side to the other side, and cover it when tiling . One side of the cow nose joint , and then with the Kevlar line equipped with a needle , and the other side of the joint can be sewn, just sew two ends, and can block the nose joint , so the material is not Will extend into the joint, check whether the covering cloth has been completely covered on the joint after sewing, to ensure that it will not be picked up during the operation . teflen conveyor belts have many joints , but in any case , in order to make the equipment work properly , it must be connected in a certain way to ensure that there is no problem in use .

Features of PTFE conveyor belt:

1. It has high temperature resistance (continuous use temperature above 260 degrees Celsius) and good air permeability.
2. Corrosion resistance (not affected by most chemicals and solvents). Good insulation.
3. Anti-adhesive (almost all adhesives such as resin and paint can be easily removed).
4. teflen conveyor belt has good stability, good durability, small friction coefficient and smooth balance of transportation.

Specification of PTFE conveyor belt:

Application of PTFE conveyor belt:

A : Widely used in the mechanical matching of belt pressing and bonding interlining
B : Various food baking, frozen food thawing (rice, rice cake, candy, etc.)
C : Various electronic components welding and conveying machinery
D : Industrial chemicals, rubber and plastic sheets, heat treatment of electrical parts, heat-resistant and non-stick special transport belts
E : Transport of rust-proof adhesive for automotive parts, transport belts with acid, alkali, and corrosive materials

Package of PTFE conveyor belt

Workshop of PTFE conveyor belt