100-500mesh ,304,304L,316,316L stainless steel twill wire mesh

Quick details & specifications :

• Material : Stainless steel304,304A,304L,316,316L,etc
• Edge :open edge
• Weaving pattern : Twill weaving .(Plain or dutch, reverse dutch ,five heddle is also available on your request )
• Mesh:100-635 mesh
• Wire diameter :>min 0.02mm
• Roll Width : standard from 0.6-6m
• Roll length :standard 30m /100ft
• % Open Area:The proportion of the opening area in the total screen area is expressed as a percent. See the following function.%

Open Area = 100 * opening [mm]² / (opening [mm] + wire diameter [mm])²

• Aperture / Opening:The dimension between two adjacent parallel wires, usually measured in inches or millimeters. But the opening is not affected by the diameter of the wire.

Mesh number = 25.4 mm / (wire diameter [mm] + opening size [mm])

• Wire mesh size is not only assigned a mesh number, but also denominated in microns. Mesh size means the number of openings per inch. But micron tells us the nominal opening size, and they can convert to each other.

Descriptions :

Twill weave can be made from larger diameter wires than would be possible in plain square weave to obtain greater strength, density, or corrosion resistance. This weave is stronger than plain weave. Each weft wire alternately crosses over two, then under two, warp wires producing a diagonal pattern. The wire diameter for both warp and weft is normally the same.Twill weave is usually used to accommodate a heavier than standard wire diameter in association with a given mesh.

Applications:

• In acid, alkali environment conditions sieving and filtering.
• Petroleum industry as mud mesh,.
• Chemical fiber industry as screen mesh.
• Plating industry as acid cleaning mesh.
• This cloth has a wide application capable of supporting greater loads and finer filtrations.

Notice :

1. Own a large stock for standard size , save time and cost for you .
2. Free sample in standard size is available
3. Any customerized special request is always avilable .
4. Drawings or item descriptions or SAMPLE will help us to serve you in better and right way

Please offer below datas for the inquiry :

1.Material

2. Mesh & wire diameter

3. roll length and width

4. any special request : packing , delivery time , etc .