Raw edge Square hole Mining Quarry Screen Mesh Sheet for Vibrating in mining
Descriptions :
There is square hole and slotted hole for mining and quarry screen mesh in vibrating screen deck used in vibrating screen machines to filter and separate sands, gravel, coal, stones, rocks and other wet and dry materials. But Square hole type Wire Mesh is one of the most commonly used mining screens .Typically, it is made of wires of the same diameter that are crimped to form precise square openings and achieve maximum rigidity. for the edge , we have raw edge , hook edge or wrap plate edge . but the raw edge is mostly common and flexible used in sieveing .Raw edge means after we finished weaving on machine , we dont need to do any special treament .
RAW EDGE (Plain edge ) Square hole shape
Quick detail :
Carbon steel parameter:
NO | Grade | Chemical Composition | Strength Property | ||
C | Si | Mn | σb (MPa) | ||
1 | 30Mn | 0.27-0.34% | 0.17-0.37% | 0.70-1.00% | 540 |
2 | 45 | 0.42-0.50% | 0.17-0.37% | 0.50-0.80% | 600 |
3 | 50 | 0.47-0.55% | 0.17-0.37% | 0.50-0.80% | 630 |
4 | 55 | 0.52-0.60% | 0.17-0.37% | 0.50-0.80% | 645 |
5 | 60 | 0.57-0.65% | 0.17-0.37% | 0.50-0.80% | 675 |
6 | 65 | 0.62-0.70% | 0.17-0.37% | 0.50-0.80% | 695 |
7 | 70 | 0.67-0.75% | 0.17-0.37% | 0.50-0.80% | 715 |
8 | 65Mn | 0.62-0.70% | 0.17-0.37% | 0.90-1.20% | 980 |
9 | 72A | 0.69-0.76% | 0.15-0.35% | 0.30-0.60% | 1570 |
Stainless Steel Parameter:
NO | Grade | Chemical Composition | Strength Property | |||
C | Ni | Mn | Cr | σb (MPa) | ||
1 | 202 | ≤0.15% | 4.0-6.0% | ≤7.5% | 17.0-19.0 | 520 |
2 | 304 | ≤0.08% | 8.0-10.5% | ≤2.0% | 18.0-20.0 | 520 |
3 | 321 | ≤0.08% | 9.0-12.0% | ≤2.0% | 17.0-19.0 | 520 |
4 | 316 | ≤0.08% | 10.0-14.0% | ≤2.0% | 16.0-18.5 | 520 |
Parts of mine quarry screen mesh parameters :
Aperture | Light Duty | Medium Duty | Heavy Duty | ||||||
---|---|---|---|---|---|---|---|---|---|
Wire Diameter | Weight | Open Area | Wire Diameter | Weight | Open Area | Wire Diameter | Weight | Open Area | |
mm | mm | kg/m2 | % | mm | kg/m2 | % | mm | kg/m2 | % |
2.0 | – | – | – | – | – | – | 1.37 | 7.1 | 35 |
3.2 | – | – | – | 2.00 | 9.9 | 37 | 2.50 | 14.1 | 31 |
4.0 | 2.00 | 8.50 | 44 | 2.50 | 12.2 | 38 | 3.05 | 16.8 | 32 |
5.0 | 2.00 | 7.80 | 51 | 2.50 | 16.6 | 44 | 3.05 | 14.7 | 38 |
5.6 | 2.50 | 9.80 | 48 | 3.05 | 13.7 | 41 | 4.00 | 21.2 | 34 |
6.4 | 2.50 | 8.89 | 51 | 3.05 | 12.6 | 46 | 4.00 | 19.6 | 38 |
6.8 | 2.50 | 9.00 | 51 | 3.05 | 10.0 | 44 | 4.00 | 19.7 | 37 |
7.1 | 2.50 | 8.80 | 55 | 3.05 | 11.9 | 48 | 4.00 | 18.3 | 41 |
8.0 | 2.50 | 10.80 | 54 | 4.00 | 16.9 | 44 | 5.00 | 24.4 | 38 |
9.0 | 3.05 | 9.80 | 55 | 4.00 | 15.6 | 48 | 5.00 | 22.7 | 44 |
10.0 | 3.05 | 9.10 | 58 | 4.00 | 14.5 | 51 | 5.00 | 21.2 | 44 |
11.2 | 3.05 | 10.40 | 54 | 5.00 | 19.6 | 48 | 5.60 | 28.6 | 44 |
12.5 | 4.00 | 12.30 | 57 | 5.00 | 18.1 | 51 | 5.60 | 20.0 | 47 |
14.0 | 4.00 | 16.70 | 54 | 5.00 | 20.0 | 51 | 6.80 | 24.6 | 48 |
16.0 | 5.00 | 15.10 | 58 | 5.60 | 19.5 | 56 | 6.80 | 22.6 | 51 |
18.0 | 5.00 | 14.50 | 58 | 6.80 | 20.7 | 55 | 7.10 | 25.0 | 51 |
20.0 | 5.60 | 14.00 | 61 | 6.80 | 19.2 | 58 | 7.10 | 24.0 | 54 |
22.0 | 5.60 | 17.60 | 61 | 7.10 | 21.5 | 57 | 8.00 | 26.7 | 54 |
25.0 | 6.80 | 16.10 | 64 | 7.10 | 20.1 | 60 | 8.00 | 24.6 | 57 |
28.0 | 7.00 | 14.70 | 63 | 8.00 | 19.0 | 61 | 9.00 | 27.8 | 57 |
32.0 | 8.00 | 20.60 | 64 | 9.00 | 26.0 | 60 | 10.00 | 30.4 | 58 |
38.0 | 8.00 | 18.70 | 67 | 9.00 | 28.1 | 64 | 10.00 | 27.9 | 61 |
40.0 | 9.00 | 21.00 | 67 | 10.00 | 25.4 | 64 | 11.20 | 31.1 | 61 |
45.0 | 9.00 | 19.50 | 69 | 10.00 | 23.4 | 67 | 11.20 | 28.4 | 64 |
50.0 | 10.00 | 23.20 | 69 | 11.20 | 26.0 | 67 | 12.50 | 31.8 | 64 |
56.0 | 10.00 | 19.20 | 72 | 11.20 | 28.7 | 69 | 12.50 | 29.0 | 67 |
63.0 | 10.00 | 17.40 | 75 | 11.20 | 24.5 | 72 | 12.50 | 25.1 | 70 |
76.2 | 10.00 | 14.80 | 78 | 11.20 | 16.0 | 75 | 12.50 | 20.0 | 73 |
80.0 | 10.00 | 16.00 | 79 | 11.20 | 17.5 | 72 | 12.50 | 21.5 | 75 |
90.0 | 10.00 | 14.00 | 81 | 11.20 | 15.7 | 79 | 12.70 | 19.4 | 77 |
100.0 | 10.00 | 10.00 | 82 | 11.20 | 14.3 | 81 | 12.70 | 17.6 | 79 |
Other mesh sizes and types are available upon request. |
Applications :
Notice :
1.When ordering screens the following technical aspects should be taken into account :
2. Payment term : TT ,Lc or insurance online payment ,etc
3.Flat sheet,please supply below info.
4.With hooks or wrap steel sheet along the edge .
Please refer the "standard edge designations" above,Choose the most suitable one.
If you have the drawing,please provide us the drawing or picture.Thank you.