U-shaped metal sheet horseshoe chain mesh belt for River cleaning and Garbage disposal
Descriptions :

Stainless Steel Horseshoe Chain Mesh Belt is made of pivots and metal sheets. The two ends of the pivot are welded. For some specifications , the ends of the pivot can also be seamed. The width of the mesh belt is determined by the mesh belt specifications and the number of odd holes. Flat Wire Belt requires very little maintenance work, and if used properly, it has a long lifespan. The materials of Flat Wire Belts are carbon steel, galvanized steel, 304 and 316 stainless steel.

​Quick Detail :

Proper sprocket location is essential for smooth belt operation. Sprocket teeth must always drive against the connector rods. This accomplished by locating the DRIVE sprockets so that the teeth are in the odd numbered openings and locating the tail sprockets so that the teeth are in the even numbered openings.

The drive shaft must be perpendicular to the belt and the drive shaft and infeed sprocket must be parallel. 6. After making sure the conveyor is cleared off and the drive sprockets are moving the belt in the correct direction, run the conveyor. Tension the belt with the infeed take-up.

The following hints on belt operation will help avoid any problems with your wire mesh belt conveyor:

A. Observe direction of belt travel as shown in the drawings provided in this manual.
B. Loading should be evenly distributed across the full width of the belt.
C. Unloading of the belt should be positive. Loads should not be held stationary while
the belt is running.
D. Belt should not be started or stopped when fully loaded.
E. Keep the belt and conveyor clean so that product cannot jam the belt or get
between the sprockets and belt

Applications :

• Drying equipment
• Bread production equipment
• Cleaning equipment
• Sorting equipment
• Heat treat equipment

​

Notice :

1. Please send to us about your request with specificaions description or drawings
2. Payment term: TT,LC ,or any insurance order way through other platform
3. Delivery time : it is very fast if it is standard size .
4. Sprockets and other drive components can also be supplied as per request. Please contact us for more detailed specifications regarding our flat wire belts and corresponding sprockets.

CUSTOMERIZED BELT , WE WELCOME YOU .