9 5/8" Water Well Pipe With Plain End Connection Wedge Wire Screen Filter
Wedge Wire Screen Filter Characteristics:
1. High strength. The cross-section height of V-shaped screen bar is greater than the width, and the
screen bar has its own strength. The contact points between the screen bar and the support bar are
fixed by welding to form a whole screen bar.
2. High opening rate. Generally, the opening rate of perforated plate is less than 30%, because of the
width of the bridge between the holes, otherwise the bridge is easy to break, and Johnson Net is not
subject to such restrictions. The bridge of Johnson Net is the screen bar, because the processing
method and cross-section shape of the screen bar make it not easy to break, the bridge can take a
relatively narrow size, reduce the width of the screen bar or expand the gap between the screen bars,
which can increase the efficiency The opening rate of Johnson screen.
Material | Low Carbon Galvanized Steel (LCG) and Stainless Steel (SUS304, SUS316, SUS316L) or can be made according to the customers requirements | ||||
OD Range | According to request and the actual flange and strengthen bar | ||||
ID Normal Size | 176mm,200mm,230mm,255mm.Accroding to request | ||||
Surface Profile | Triangle wire | ||||
Support Profile | triangle wire, round bar, and wedge wire | ||||
Normal Length | 6Mts. & 3Mts, we suggest 5.8m(adapt to the container) | ||||
Slot Size | 0.10, 0.15, 0.2, 0.25, 0.30 - 3mm | ||||
Slot Direction | Radial Direction | ||||
Cylinder diameter | 10mm-1200mm | ||||
Open Area | up to 60% |
Wedge Wire Screen Filter Advantage:
high screening rate, abrasion resistance, corrosion resistance, anti - slip,anti - vibration,
strong elasticity, toughness, not close.
The mesh section is trapezoid or wedge.There's room in the gap.It is made of stainless steel wire cold
rolled screen, support bar is welded by automatic production equipment, screen seam uniform, stable
welding quality, high porosity,long service life, high strength, steel degree and bearing capacity, can be
made into various shapes of screen filter device.
For special areas of application (among others, the starch industry) screen cylinders can of course also
be manufactured in looped finish. Adjoining is an example of two end flanges. In this case, as well,
almost all requirements by our customers can be realized after corresponding technical clarification.