Stainless Steel 316 For Filtration With Slotted Johnson Wire Screen

Johnson Wire Screen Parameters

Johnson Wire Screen Description

Stainless Steel 316 Wedge Wire Wrapped Slotted Well Screen Pipe is manufactured by a v or wedge

shaped wire around an internal array of longitudinal support rods.

Each intersecting point of these wire is fusion welded.

The v or wedge shaped profile wire wraps around the support rods over the full length of the screen

creating a continuous slot opening, hence the screen allows water (oil) to enter your well freely in ample

quantities,while at the same time keeps the majority of sand and gravel out of the well.

Johnson Wire Screen Characteristics

♦ V-Shaped Slots — Openings shaped like a "v" that open toward the inside of the well tend to allow the

particles that are just barely smaller than the width of the slot pass.

In other shapes of openings, these particles would get caught in the screen and clog it.

♦Better Sand Filtration — Due to specialize manufacturing process, wide range of slot opening is available

down to 0.15mm to allow proper slot selection depending upon the size of sand in particular area.

This gives better sand control and reduced pump maintenance and longer tube well life.

Johnson Wire Screen Advantages:

►Low maintenance costs — Separation at the screen surface which can easily cleaned by scraping or

back washing.

►Maximum process output — Precise and continuous slot openings resulting in accurate separation

without loss off media.

►Energy Saving — Due to reduce frictional head losses and increased discharge, the pump load reduces

the power required to pump same quantity of water. Power saving of around 20-25% is observed.

Johnson Wire Screen Packing&Delivery: