Large Open Area V Shaped Slots For Sand Filtration Water Well Screen Pipe
Water Well Screen Pipe Description
Water Well Screen Pipe is made by winding cold-rolled wire, approximately triangular in cross section,
around a circular array of the longitudinal rods. The wire is attached to the rods by welding, producing
rigid one-piece units having high strength characteristics at minimum weights.The wire is attached to the
rods by welding, producing rigid one-piece units having high strength characteristics at minimum weights.
There is a fixed value slot between each v wire, and the continuous slot, designed to provide
maximum open are to reduce entrance velocity, increase hydraulic efficiency and promote more
effective development.
1. The filter rating is 0.05mm-100mm.
2. Main material is AISI304, AISI316, AISI316L,Hastelloy etc.
3. Connectors and the ending according to client’s request
4. We also can produce the specific sizes according to clients’ request,
design the screen according the usage.
Water Well Screen Pipe Specification:
Material | mainly stainless steel, carbon steel galvanized, carbon steel spray or other customer requirements material. |
Grade | 205, 304,304L, 316L |
O.D | 89mm 117mm 219mm 273mm 325mm |
Gap | 0.1mm-15mm, arbitrarily selected screen size to meet different construction requirements. |
Characteristics | Not easy to jam Slot even Strong corrosion resistance |
Length | 2.9m / 5.85 m, up to 6m |
Connection Form | Welded rings/screws/Thread connection |
Diameter | 2 " 3 " 4 " 5 " 6 " 8 " 10 " 12 " 14 " 16 " 20 ". 29 mm - 1000 mm. |
Wire Shape | V Shape |
Water Well Screen Pipe Characteristics
♦ Adjustable gap: different users, using different filter equipment and filter media,
have different requirements for the gap of the internal wire wound screen.
Because the screen pipe is continuously welded on the equipment,
the gap between stainless steel trapezoidal wires can be adjusted.
In this way, it can meet the needs of different users without increasing the cost,
and the plastic filter element needs to adjust the gap to make the mold again,
so it is not easy to meet the needs of users. The small gap can reach 20 microns.
♦Corrosion resistance: for neutral water, acid water, alkaline water, hydrochloric acid,
sulfuric acid, salt and so on, if these materials are properly selected,
the filtration equipment can be operated economically and safely.
Water Well Pipe Application:
1. Heavy oil, sand oil, light oil, SAGD, CBM, bitumen, thermal
2. Water injection, bi-modal sand, carbonates, thin pay
3. Horizontal, vertical , deviated oil and gas and water wells
Water Well Screen Pipe Packing&Delivery: