Intermediate copper wire drawing machine manufacturers 1800m/min copper wire machines

1. Technical parameter:

2. Brier introduction:
Inlet Wire Supply: The machine receives copper wire stock from a spool or coil, which serves as the inlet wire supply for the drawing process.
Drawing Dies: A series of drawing dies, made of hard material such as tungsten carbide, are arranged in succession within the machine. These dies progressively reduce the diameter of the copper wire as it passes through them.
Drawing Cones or Rollers: Drawing cones or rollers, often made of hardened steel, provide the pulling force necessary to pull the wire through the drawing dies.
Tension Control System: The machine incorporates a tension control system to regulate the tension applied to the wire during the drawing process. This ensures smooth and continuous wire feeding without breakage.
Cooling and Lubrication Systems: Cooling and lubrication systems are employed to reduce friction and heat generation during the drawing process. This helps to maintain the integrity of the wire and extends the life of the drawing dies and rollers.
Monitoring and Control Panel: Modern intermediate wire drawing machines may feature electronic sensors and a control panel for real-time monitoring of parameters such as wire tension, speed, and temperature. This allows for precise control over the drawing process.


3. Operation:
Wire Feeding: The copper wire stock is fed into the machine from the spool or coil and passed through a series of guide rollers to ensure proper alignment.
Drawing Process: The wire is pulled through the series of drawing dies by the drawing cones or rollers. With each pass through a die, the diameter of the wire is reduced incrementally until it reaches the desired size.
Cooling and Lubrication: During the drawing process, cooling and lubrication systems apply coolant and lubricant to the wire to reduce friction and heat. This helps to prevent surface defects and maintain the quality of the drawn wire.
Quality Inspection: As the wire exits the drawing machine, it may undergo quality inspection to ensure that it meets specified dimensional and quality standards. This may involve measuring wire diameter, surface finish, and mechanical properties.

4. FAQ:
Dear customers, there are several models for the coppr rod breakdown machine. In order to recommend the suitabe models, we'd like to learn some information:
1. Inlet and outlet wire diameter
2. Whether need online annealer
3. Take up method: Spool bobbin or coiler?
4. Dimension drawing of spool bobbin/wire basket

Best regards

5. Reference photos