GPS Transceiver Module Condor C1216 24-pin Part number 68676-10
Module introduction:
Trimble's Condor family of GPS modules features major advancements in signal tracking for applications working in poor signal environments. With their higher sensitivity, performance and faster startup times, the Condor GPS modules enable system integrators to easily add Global Positioning System (GPS) capability to a mobile device with minimal impact on its size or battery life at a very economical price.
The Condor GPS family includes modules with different form factors and interface options. The Condor GPS family includes multiple modules with different form factors and interface options. All the modules in the family offer top tier positioning performance. The features and specifications listed below are typical for all Condor GPS modules in the family.
Key feature:
Product code | 68676-10 |
Horizontal accuracy | 2m |
Vertical accuracy | Less than 3m |
Velocity | 515 m/s (COCOM Limit) |
PPS | Timing output |
Reacquisition | 2s |
Hot start | 2s |
Warm start | 35s |
Cold start | 38s |
Tracking sensitivity | –160dBm |
Acquisition sensitivity | –146dBm |
Dynamic constraint | 2g |
Connection | 24-pin castellation |
Ports | Serial interface |
Interface | Configurable 4 μs |
Protocols | NMEA GGA5, GSA, GSV, RMC (default) |
Prime power | 3 to 3.6V (3.3V typical) |
Power consumption | Less than 37 mA typical @ 20 °C |
Operating temperature | -40 to +85°C |
Vibration | 5Hz to 20Hz: 0.008g²/Hz |
20Hz to 100Hz: 0.05g²/Hz | |
100Hz to 900Hz: −3 dB/octave | |
Dimensions | 16mm x 12.2mm x 2.13mm |
Weight | Less than 2g |
GENERAL OVERVIEW
Trimble’s Condor C1216 GPS receiver module
is a smart alternative to a GPS chipset for
many consumer and commercial positioning
applications. Use the C1216 to bring
innovative products to market faster.
The Condor C1216 receiver features
powerful positioning performance in a
16.0 mm x 12.2 mm x 2.13 mm package.
The module’s 24 reflow-solder able surface mount
edge castellation provide an
interface for your design without the need
for costly I/O and RF connectors.
The Condor C1216 provides an L1 Frequency
GPS receiver, with NMEA protocol from both
a serial port and a USB port, and also a PPS
timing output
Advantage:
The C1216 has an onboard low noise
amplifier (LNA) that is compatible
with both active and passive antenna
implementations.
The C1216 has built-in antenna detection
for open and short circuit conditions; alerts
are on by default, but can be turned off
by command. The C1216 also has a 2.8 V
reference output that can supply up to
25 mA. Choose the Condor C1216 for top
tier positioning performance, the best
components, and the highest production
quality standards.
Ordering information :
ABOUT US
TOP offers communication antennas & modules with wonderful solution, Perfect after-sales service, strict quality testing and competitive price.
module brands includes Sierra Wiressless, Simcom, Cinterion, U-blox, Hua wei , ZTE, Holux, Globalsat, GlobaTop, Skylab, Telit, etc.
We're also one of the biggest stocking distributors of active and passive electronic components located in Shenzhen,