RC0603JR-0710KL

0603 SMD 10K OHM 5% 1/10W Thick Film Surface Mount Yageo Resistor

CONSTRUCTION

The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environmental influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Ni-barrier) are added, as shown in Fig.9.

SCOPE

This specification describes RC series chip resistors with lead free terminations made by thick film process.

FEATURES

Ÿ Halogen Free Epoxy

Ÿ RoHS compliant

Products with lead free terminations meet RoHS requirements

Pb-glass contained in electrodes, resistors element and glass are exempted by RoHS

Ÿ Reducing environmentally hazardous wastes

Ÿ High component and equipment reliability

Ÿ Saving of PCB space

Ÿ None forbidden-materials used in products/production

FUNCTIONAL DESCRIPTION

OPERATING TEMPERATURE RANGE RC0402 to RC2512 Range: -55℃ to +155℃ (Fig. 10-1) RC0075 to RC0201 Range: -55℃ to +125℃ (Fig. 10-2)

POWER RATING

Each type rated power at 70 °C: RC0075=1/50W RC0100=1/32W RC0201=1/20W RC0402=1/16W, 1/8W RC0603=1/10W, 1/5W RC0805=1/8W, 1/4W RC1206=1/4W, 1/2W RC1210=1/2W RC1218=1W RC2010=3/4W RC2512=1W, 2W

RATED VOLTAGE

The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = (PxR) or max. working voltage whichever is less Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (Ω)

Product Attributes

APPLICATIONS

All general purpose application

Drawing:

Product Photo