FL301 Series Low Cost Digital Dn150 Agricultural Application Water Flow Sensor Price
Applications in beverage, chemical, pharmaceutical, petroleum, wastewater, water, mining, mineral processing, power, pulp and paper. And the chemical industry. Magnetic flowmeters are used in water treatment plants to measure treated and untreated sewage, process water, water, and chemicals. Mining and mineral processing industry applications include process water and process slurry flows and dense media flows.
Speifications
Main features
1. No moving assembly, no abrasion
2. Turn down ratio: 1:100
3. No flow lifting device
4. Applicable to various electronic conductive liquids
5. Not influenced by temperature, viscosity, pressure and density
6. Corrosion protection and self-diagnosis
7.Measure both to and reverse flow
8. Super large display, easy to operate
9. Long-term EEPROM, save data when power off
10. Support MODBUS/HART communication protocol
Installation Sketch
The sensor must not be installed at the inlet of the pump, but at the outlet of the pump.
There must be a straight pipe section with a lengthof at least 10*D (D is the inner diameter of theflowmeter) in front of the flowmeter, and a straight pipe section with a length of 5*D at the rear.